1
2fence_drac(8)               System Manager's Manual              fence_drac(8)
3
4
5

NAME

7       fence_drac - fencing agent for Dell Remote Access Card
8
9

SYNOPSIS

11       fence_drac [OPTION]...
12
13

DESCRIPTION

15       fence_drac  is  an  I/O  Fencing  agent which can be used with the Dell
16       Remote Access Card (DRAC).  This card provides remote  access  to  con‐
17       troling  power  to  a server.  It logs into the DRAC through the telnet
18       interface of the  card.   By  default,  the  telnet  interface  is  not
19       enabled.  To enable the interface, you will need to use the racadm com‐
20       mand in the racser-devel rpm available from Dell.  To enable telnet  on
21       the DRAC:
22
23       [root]# racadm config -g cfgSerial -o cfgSerialTelnetEnable 1
24
25       [root]# racadm racreset
26
27       fence_drac  accepts  options on the command line as well as from stdin.
28       Fenced  sends  parameters  through  stdin  when  it  execs  the  agent.
29       fence_drac  can  be  run  by itself with command line options.  This is
30       useful for testing and for turning outlets on or off from scripts.
31
32

OPTIONS

34       -a IPaddress
35              IP address or hostname of the switch.
36
37       -c cmd_prompt
38              Force fence_drac to use cmd_prompt as the command prompt
39
40       -d dracversion
41              Force fence_drac to treat the device as though it  was  for  the
42              specified drac version
43
44       -D dumpfile
45              Debug file of the telnet interaction
46
47       -h     Print  out  a  help  message  describing available options, then
48              exit.
49
50       -l login
51              Login name.
52
53       -m modulename
54              The module name of the blade when using DRAC/MC firmware.
55
56       -o action
57              The action required.  reboot (default), off, on or status.
58
59       -p password
60              Password for login.
61
62       -V     Print out a version message, then exit.
63
64

STDIN PARAMETERS

66       action = < param >
67              The action required.  reboot (default), off, on or status.
68
69       agent = < param >
70              This  option  is  used  by  fence_node(8)  and  is  ignored   by
71              fence_apc.
72
73       cmd_prompt = < param >
74              Force fence_drac to use cmd_prompt as the command prompt
75
76       drac_version = < param >
77              Force  fence_drac  to  treat the device as though it was for the
78              specified drac version.
79
80       debug = < dumpfile >
81              Debug file of the telnet interaction
82
83       ipaddr = < hostname | ip >
84              IP address or hostname of the switch.
85
86       login = < param >
87              Login name.
88
89       modulename = < param >
90              The module name of the blade when using DRAC/MC firmware.
91
92       passwd = < param >
93              Password for login.
94
95
96
97       SEE ALSO
98              fence(8), fence_node(8)
99
100
101
102                                                                 fence_drac(8)
Impressum