1AIPTEK(4) Kernel Interfaces Manual AIPTEK(4)
2
6 aiptek - Aiptek USB Digital Tablet Input Driver for Linux
7
9 Section "InputDevice"
10 Identifier "idevname"
11 Driver "aiptek"
12 Option "Device" "devpath"
13 ...
14 EndSection
15
17 aiptek is an Xorg input driver for Aiptek HyperPen USB-based tablet
18 devices. This driver only supports the USB protocol, and only under
19 Linux; for RS-232C-based HyperPens, please see the "hyperpen" driver.
20 The aiptek driver functions as a pointer input device, and may be used
22 as the X server's core pointer.
23
25 This driver supports the Aiptek HyperPen 4000U, 5000U, 6000U, 8000U and
26 12000U USB-based input tablet on some Linux platforms.
27
29 Please refer to xorg.conf(5x) for general configuration details and for
30 options that can be used with all input drivers. This section only
31 covers configuration details specific to this driver.
32 Multiple instances of the Aiptek devices can cohabit. It can be useful
34 to define multiple devices with different active zones. Each device
35 supports the following entries:
36 Option "Type" "stylus"|"eraser"|"cursor"
38 sets the type of tool the device represent. This option is
39 mandatory.
40 Option "Device" "path"
42 sets the path to the special file which represents serial
43 line where the tablet is plugged. You have to specify it
44 for each subsection with the same value if you want to have
45 multiple devices with the same tablet. This option is
46 mandatory.
47 Option "USB" "on"
49 specifies that you are using the USB bus to communicate
50 with your tablet. This setting is mandatory, as USB is the
51 only protocol supported by this driver.
52 Option "DeviceName" "name"
54 sets the name of the X device.
55 Option "Mode" "Relative"|"Absolute"
57 sets the mode of the device.
58 Option "HistorySize" "number"
60 sets the motion history size. By default the value is zero.
61 Option "AlwaysCore" "on"
63 enables the sharing of the core pointer. When this feature
64 is enabled, the device will take control of the core
65 pointer (and thus will emit core events) and at the same
66 time will be able, when asked so, to report extended
67 events. You can use the last available integer feedback to
68 control this feature. When the value of the feedback is
69 zero, the feature is disabled. The feature is enabled for
70 any other value.
71 Option "XTop" "number"
73 First of three sets of parameters to set the active zone.
74 This sets the X coordinate of the top corner of the active
75 zone. "TopX" is a synonym.
76 Option "YTop" "number"
78 First of three sets of parameters to set the active zone.
79 This sets the Y coordinate of the top corner of the active
80 zone. "TopY" is a synonym.
81 Option "XBottom" "Inumber"
83 First of three sets of parameters to set the active zone.
84 This sets the X coordinate of the bottom corner of the
85 active zone. "BottomX" is a synonym.
86 Option "YBottom" "number"
88 First of three sets of parameters to set the active zone.
89 This sets the Y coordinate of the bottom corner of the
90 active zone. "BottomY" is a synonym.
91 Option "XMax" "number"
93 Second of three sets of parameters to set the active zone.
94 This sets the the X coordinate of the bottom corner of the
95 active zone. The Top X corner's coordinate is fixed at 0.
96 "MaxX" is a synonym.
97 Option "YMax" "number"
99 Second of three sets of parameters to set the active zone.
100 This sets the the Y coordinate of the bottom corner of the
101 active zone. The Top Y corner's coordinate is fixed at 0.
102 "MaxY" is a synonym.
103 Option "XOffset" "number"
105 Third of three sets of parameters to set the active zone.
106 This sets the X coordinate of the top corner of the active
107 zone. "OffsetX" is a synonym.
108 Option "YOffset" "number"
110 Third of three sets of parameters to set the active zone.
111 This sets the Y coordinate of the top corner of the active
112 zone. "OffsetY" is a synonym.
113 Option "XSize" "number"
115 Third of three sets of parameters to set the active zone.
116 This sets the X coordinate of the bottom corner of the
117 active zone. Unlike others, this parameter is expressed in
118 relative coordinates from the "XOffset" parameter. "XSize"
119 is a synonym.
120 Option "YSize" "number"
122 Third of three sets of parameters to set the active zone.
123 This sets the Y coordinate of the bottom corner of the
124 active zone. Unlike others, this parameter is expressed in
125 relative coordinates from the "YOffset" parameter. "YSize"
126 is a synonym.
127 Option "ZMin" "number"
129 Minimum pressure reading that will be accepted from the
130 Stylus tool. "MinZ" is a synonym.
131 Option "ZMax" "number"
133 Maximum pressure reading that will be accepted from the
134 Stylus tool. "MaxZ" is a synonym.
135 Option "XThreshold" "number"
137 Minimal change in X coordinate position that will be
138 accepted as data input. "ThresholdX" is a synonym.
139 Option "YThreshold" "number"
141 Minimal change in Y coordinate position that will be
142 accepted as data input. "ThresholdY" is a synonym.
143 Option "ZThreshold" "number"
145 Minimal change in pressure reading that will be accepted as
146 data input. "ThresholdZ" is a synonym.
147 Option "InvX" "on"
149 Inverts X coordinate reports. "XInv" is a synonym.
150 Option "InvY" "on"
152 Inverts Y coordinate reports. "YInv" is a synonym.
153 Option "Pressure" "soft"|"hard"|"linear"
155 Pressure reports either delivered in linearly incremental
156 values (default), or perturbed by one of two log-linear
157 algorithms ("soft" or "hard".)
158 Option "KeepShape" "on"
160 When this option is enabled, the active zone begins
161 according to TopX and TopY. The bottom corner is adjusted
162 to keep the ratio width/height of the active zone the same
163 as the screen while maximizing the area described by the
164 active area set of parameters, XTop/YTop/XBottom/YBottom,
165 XMax/YMax, or XOffset/YOffset/XSize/YSize.
166 Option "DebugLevel" number
168 sets the level of debugging info reported.
169 This driver is currently Linux specific.
171
173 Xorg(1x), xorg.conf(5x), xorgconfig(1x), Xserver(1x), X(7), hyper‐
174 pen(4).
175
177 Bryan W. Headley <bheadley@earthlink.net>
178
180 http://aiptektablet.sourceforge.net tracks ongoing development of this
181 driver, the Linux kernel driver, and a GUI front-end application that
182 works in concert with the above.
183X Version 11 xf86-input-aiptek 1.0.1 AIPTEK(4)