sane-magicolor(5)

1sane-magicolor(5)        SANE Scanner Access Now Easy        sane-magicolor(5)
2
3
4

NAME

6       sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners
7

DESCRIPTION

9       The  sane-magicolor  backend supports KONICA MINOLTA magicolor scanners
10       connected via USB or LAN. Currently, only the magicolor  1690MF  device
11       is  supported,  no  other  devices  with the same scanning protocol are
12       known.
13

SUPPORTED DEVICES

15       The following scanner should work with this backend:
16
17       Device Details
18       -----------------------------
19       Vendor: KONICA MINOLTA
20       Model: magicolor 1690MF
21
22

CONFIGURATION

24       This section describes the backend's configuration  file  entries.  The
25       file is located at:
26
27              /etc/sane.d/magicolor.conf
28
29       For a proper setup, at least one of the following entries are needed:
30
31              net autodiscovery
32              net [IP ADDRESS] [DEVICE-ID]
33              usb
34              usb [VENDOR-ID] [DEVICE-ID]
35
36

FILES

38       /etc/sane.d/magicolor.conf
39              The backend configuration file
40
41       /usr/lib64/sane/libsane-magicolor.a
42              The static library implementing this backend.
43
44       /usr/lib64/sane/libsane-magicolor.so
45              The shared library implementing this backend (present on systems
46              that support dynamic loading).
47
48

ENVIRONMENT

50       SANE_CONFIG_DIR
51              This environment variable specifies the list of directories that
52              may contain the configuration file.  On *NIX systems, the direc‐
53              tories are separated by a colon (`:'), under OS/2, they are sep‐
54              arated  by a semi-colon (`;').  If this variable is not set, the
55              configuration file  is  searched  in  two  default  directories:
56              first,   the   current  working  directory  (".")  and  then  in
57              /etc/sane.d.  If the value of the environment variable ends with
58              the  directory separator character, then the default directories
59              are searched after the explicitly  specified  directories.   For
60              example,  setting SANE_CONFIG_DIR to "/tmp/config:" would result
61              in directories /tmp/config, ., and  /etc/sane.d  being  searched
62              (in this order).
63
64       SANE_DEBUG_MAGICOLOR
65              If the library was compiled with debug support enabled, this en‐
66              vironment variable controls the debug level  for  this  backend.
67              Higher debug levels increase the verbosity of the output.
68
69              Example: export SANE_DEBUG_MAGICOLOR=127
70
71              To  obtain debug messages from the backend, set this environment
72              variable before calling your favorite frontend  (e.g.   xscanim‐
73              age(1)).
74
75              Example: SANE_DEBUG_MAGICOLOR=65 xscanimage
76

KNOWN BUGS AND RESTRICTIONS

78       Large  color  scans  may  sometimes timeout due to unknown reasons (the
79       scanner simply stops returning data).
80
81       Cancelling large scans may lock up the scanner.
82
83

AUTHOR

90       Reinhold Kainhofer <reinhold@kainhofer.com>
91
92
93
94                                  10 Jan 2011                sane-magicolor(5)