gnomesystemmm_selinux(8)

1gnomesystemmm_selinux(8) SELinux Policy gnomesystemmm gnomesystemmm_selinux(8)
2
3
4

NAME

6       gnomesystemmm_selinux   -   Security  Enhanced  Linux  Policy  for  the
7       gnomesystemmm processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the gnomesystemmm processes via  flexi‐
11       ble mandatory access control.
12
13       The  gnomesystemmm  processes  execute with the gnomesystemmm_t SELinux
14       type. You can check if you have these processes  running  by  executing
15       the ps command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep gnomesystemmm_t
20
21
22

ENTRYPOINTS

24       The  gnomesystemmm_t  SELinux  type  can  be  entered via the gnomesys‐
25       temmm_exec_t file type.
26
27       The default entrypoint paths for the  gnomesystemmm_t  domain  are  the
28       following:
29
30       /usr/libexec/gnome-system-monitor-mechanism
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       gnomesystemmm  policy  is  very  flexible allowing users to setup their
40       gnomesystemmm processes in as secure a method as possible.
41
42       The following process types are defined for gnomesystemmm:
43
44       gnomesystemmm_t
45
46       Note: semanage permissive -a gnomesystemmm_t can be used  to  make  the
47       process  type  gnomesystemmm_t permissive. SELinux does not deny access
48       to permissive process types, but the AVC (SELinux denials) messages are
49       still generated.
50
51

BOOLEANS

53       SELinux   policy  is  customizable  based  on  least  access  required.
54       gnomesystemmm policy is extremely flexible  and  has  several  booleans
55       that  allow you to manipulate the policy and run gnomesystemmm with the
56       tightest access possible.
57
58
59
60       If you want to allow all daemons the ability to  read/write  terminals,
61       you  must  turn  on  the  allow_daemons_use_tty  boolean.  Disabled  by
62       default.
63
64       setsebool -P allow_daemons_use_tty 1
65
66
67
68       If you want to allow all domains to use other domains file descriptors,
69       you must turn on the allow_domain_fd_use boolean. Enabled by default.
70
71       setsebool -P allow_domain_fd_use 1
72
73
74
75       If  you want to allow sysadm to debug or ptrace all processes, you must
76       turn on the allow_ptrace boolean. Disabled by default.
77
78       setsebool -P allow_ptrace 1
79
80
81
82       If you want to allow all domains to have the kernel load  modules,  you
83       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
84       default.
85
86       setsebool -P domain_kernel_load_modules 1
87
88
89
90       If you want to allow all domains to execute in fips_mode, you must turn
91       on the fips_mode boolean. Enabled by default.
92
93       setsebool -P fips_mode 1
94
95
96
97       If you want to enable reading of urandom for all domains, you must turn
98       on the global_ssp boolean. Disabled by default.
99
100       setsebool -P global_ssp 1
101
102
103

MANAGED FILES

105       The SELinux process type gnomesystemmm_t can manage files labeled  with
106       the  following  file types.  The paths listed are the default paths for
107       these file types.  Note the processes UID still need to have  DAC  per‐
108       missions.
109
110       initrc_tmp_t
111
112
113       mnt_t
114
115            /mnt(/[^/]*)
116            /mnt(/[^/]*)?
117            /rhev(/[^/]*)?
118            /media(/[^/]*)
119            /media(/[^/]*)?
120            /etc/rhgb(/.*)?
121            /media/.hal-.*
122            /net
123            /afs
124            /rhev
125            /misc
126
127       tmp_t
128
129            /tmp
130            /usr/tmp
131            /var/tmp
132            /tmp-inst
133            /var/tmp-inst
134            /var/tmp/vi.recover
135
136

FILE CONTEXTS

138       SELinux requires files to have an extended attribute to define the file
139       type.
140
141       You can see the context of a file using the -Z option to ls
142
143       Policy governs the access  confined  processes  have  to  these  files.
144       SELinux  gnomesystemmm  policy is very flexible allowing users to setup
145       their gnomesystemmm processes in as secure a method as possible.
146
147       The following file types are defined for gnomesystemmm:
148
149
150
151       gnomesystemmm_exec_t
152
153       - Set files with the gnomesystemmm_exec_t type, if you want to  transi‐
154       tion an executable to the gnomesystemmm_t domain.
155
156
157
158       Note:  File context can be temporarily modified with the chcon command.
159       If you want to permanently change the file context you need to use  the
160       semanage fcontext command.  This will modify the SELinux labeling data‐
161       base.  You will need to use restorecon to apply the labels.
162
163

COMMANDS

165       semanage fcontext can also be used to manipulate default  file  context
166       mappings.
167
168       semanage  permissive  can  also  be used to manipulate whether or not a
169       process type is permissive.
170
171       semanage module can also be used to enable/disable/install/remove  pol‐
172       icy modules.
173
174       semanage boolean can also be used to manipulate the booleans
175
176
177       system-config-selinux is a GUI tool available to customize SELinux pol‐
178       icy settings.
179
180

AUTHOR

182       This manual page was auto-generated using sepolicy manpage .
183
184