1gnomesystemmm_selinux(8) SELinux Policy gnomesystemmm gnomesystemmm_selinux(8)
2
6 gnomesystemmm_selinux - Security Enhanced Linux Policy for the
7 gnomesystemmm processes
8
10 Security-Enhanced Linux secures the gnomesystemmm processes via flexi‐
11 ble mandatory access control.
12 The gnomesystemmm processes execute with the gnomesystemmm_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep gnomesystemmm_t
20
24 The gnomesystemmm_t SELinux type can be entered via the gnomesys‐
25 temmm_exec_t file type.
26 The default entrypoint paths for the gnomesystemmm_t domain are the
28 following:
29 /usr/libexec/kde(3|4)/ksysguardprocesslist_helper, /usr/libexec/gnome-
31 system-monitor-mechanism
32
34 SELinux defines process types (domains) for each process running on the
35 system
36 You can see the context of a process using the -Z option to ps
38 Policy governs the access confined processes have to files. SELinux
40 gnomesystemmm policy is very flexible allowing users to setup their
41 gnomesystemmm processes in as secure a method as possible.
42 The following process types are defined for gnomesystemmm:
44 gnomesystemmm_t
46 Note: semanage permissive -a gnomesystemmm_t can be used to make the
48 process type gnomesystemmm_t permissive. SELinux does not deny access
49 to permissive process types, but the AVC (SELinux denials) messages are
50 still generated.
51
54 SELinux policy is customizable based on least access required.
55 gnomesystemmm policy is extremely flexible and has several booleans
56 that allow you to manipulate the policy and run gnomesystemmm with the
57 tightest access possible.
58 If you want to dontaudit all daemons scheduling requests (setsched,
62 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
63 Enabled by default.
64 setsebool -P daemons_dontaudit_scheduling 1
66 If you want to allow all domains to execute in fips_mode, you must turn
70 on the fips_mode boolean. Enabled by default.
71 setsebool -P fips_mode 1
73
77 The SELinux process type gnomesystemmm_t can manage files labeled with
78 the following file types. The paths listed are the default paths for
79 these file types. Note the processes UID still need to have DAC per‐
80 missions.
81 cluster_conf_t
83 /etc/cluster(/.*)?
85 cluster_var_lib_t
87 /var/lib/pcsd(/.*)?
89 /var/lib/cluster(/.*)?
90 /var/lib/openais(/.*)?
91 /var/lib/pengine(/.*)?
92 /var/lib/corosync(/.*)?
93 /usr/lib/heartbeat(/.*)?
94 /var/lib/heartbeat(/.*)?
95 /var/lib/pacemaker(/.*)?
96 cluster_var_run_t
98 /var/run/crm(/.*)?
100 /var/run/cman_.*
101 /var/run/rsctmp(/.*)?
102 /var/run/aisexec.*
103 /var/run/heartbeat(/.*)?
104 /var/run/pcsd-ruby.socket
105 /var/run/corosync-qnetd(/.*)?
106 /var/run/corosync-qdevice(/.*)?
107 /var/run/corosync.pid
108 /var/run/cpglockd.pid
109 /var/run/rgmanager.pid
110 /var/run/cluster/rgmanager.sk
111 config_home_t
113 /root/.kde(/.*)?
115 /root/.xine(/.*)?
116 /root/.config(/.*)?
117 /root/.Xdefaults
118 /home/[^/]+/.kde(/.*)?
119 /home/[^/]+/.xine(/.*)?
120 /home/[^/]+/.config(/.*)?
121 /home/[^/]+/.cache/dconf(/.*)?
122 /home/[^/]+/.Xdefaults
123 /var/run/user/[0-9]+/dconf(/.*)?
124 config_usr_t
126 /usr/share/config(/.*)?
128 root_t
130 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
132 /
133 /initrd
134
137 SELinux requires files to have an extended attribute to define the file
138 type.
139 You can see the context of a file using the -Z option to ls
141 Policy governs the access confined processes have to these files.
143 SELinux gnomesystemmm policy is very flexible allowing users to setup
144 their gnomesystemmm processes in as secure a method as possible.
145 STANDARD FILE CONTEXT
147 SELinux defines the file context types for the gnomesystemmm, if you
149 wanted to store files with these types in a different paths, you need
150 to execute the semanage command to specify alternate labeling and then
151 use restorecon to put the labels on disk.
152 semanage fcontext -a -t gnomesystemmm_exec_t '/srv/gnomesystemmm/con‐
154 tent(/.*)?'
155 restorecon -R -v /srv/mygnomesystemmm_content
156 Note: SELinux often uses regular expressions to specify labels that
158 match multiple files.
159 The following file types are defined for gnomesystemmm:
161 gnomesystemmm_exec_t
165 - Set files with the gnomesystemmm_exec_t type, if you want to transi‐
167 tion an executable to the gnomesystemmm_t domain.
168 Paths:
171 /usr/libexec/kde(3|4)/ksysguardprocesslist_helper,
172 /usr/libexec/gnome-system-monitor-mechanism
173 Note: File context can be temporarily modified with the chcon command.
176 If you want to permanently change the file context you need to use the
177 semanage fcontext command. This will modify the SELinux labeling data‐
178 base. You will need to use restorecon to apply the labels.
179
182 semanage fcontext can also be used to manipulate default file context
183 mappings.
184 semanage permissive can also be used to manipulate whether or not a
186 process type is permissive.
187 semanage module can also be used to enable/disable/install/remove pol‐
189 icy modules.
190 semanage boolean can also be used to manipulate the booleans
192 system-config-selinux is a GUI tool available to customize SELinux pol‐
195 icy settings.
196
199 This manual page was auto-generated using sepolicy manpage .
200
203 selinux(8), gnomesystemmm(8), semanage(8), restorecon(8), chcon(1), se‐
204 policy(8), setsebool(8)
205gnomesystemmm 23-10-20 gnomesystemmm_selinux(8)