1pingd_selinux(8)             SELinux Policy pingd             pingd_selinux(8)
2
3
4

NAME

6       pingd_selinux - Security Enhanced Linux Policy for the pingd processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the pingd processes via flexible manda‐
10       tory access control.
11
12       The pingd processes execute with the  pingd_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep pingd_t
19
20
21

ENTRYPOINTS

23       The pingd_t SELinux type can be entered via the pingd_exec_t file type.
24
25       The default entrypoint paths for the pingd_t domain are the following:
26
27       /usr/sbin/pingd
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       pingd policy is very flexible allowing users to setup their pingd  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for pingd:
40
41       ping_t, pingd_t
42
43       Note:  semanage  permissive  -a pingd_t can be used to make the process
44       type pingd_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   pingd
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run pingd with the tightest access possible.
53
54
55
56       If you want to allow users to resolve user passwd entries directly from
57       ldap  rather  then  using  a  sssd server, you must turn on the authlo‐
58       gin_nsswitch_use_ldap boolean. Disabled by default.
59
60       setsebool -P authlogin_nsswitch_use_ldap 1
61
62
63
64       If you want to allow all daemons to write corefiles to /, you must turn
65       on the daemons_dump_core boolean. Disabled by default.
66
67       setsebool -P daemons_dump_core 1
68
69
70
71       If  you  want  to enable cluster mode for daemons, you must turn on the
72       daemons_enable_cluster_mode boolean. Enabled by default.
73
74       setsebool -P daemons_enable_cluster_mode 1
75
76
77
78       If you want to allow all daemons to use tcp wrappers, you must turn  on
79       the daemons_use_tcp_wrapper boolean. Disabled by default.
80
81       setsebool -P daemons_use_tcp_wrapper 1
82
83
84
85       If  you  want to allow all daemons the ability to read/write terminals,
86       you must turn on the daemons_use_tty boolean. Disabled by default.
87
88       setsebool -P daemons_use_tty 1
89
90
91
92       If you want to deny any process from ptracing or  debugging  any  other
93       processes,  you  must  turn  on  the  deny_ptrace  boolean.  Enabled by
94       default.
95
96       setsebool -P deny_ptrace 1
97
98
99
100       If you want to allow any process  to  mmap  any  file  on  system  with
101       attribute  file_type,  you must turn on the domain_can_mmap_files bool‐
102       ean. Enabled by default.
103
104       setsebool -P domain_can_mmap_files 1
105
106
107
108       If you want to allow all domains write to kmsg_device, while kernel  is
109       executed  with  systemd.log_target=kmsg parameter, you must turn on the
110       domain_can_write_kmsg boolean. Disabled by default.
111
112       setsebool -P domain_can_write_kmsg 1
113
114
115
116       If you want to allow all domains to use other domains file descriptors,
117       you must turn on the domain_fd_use boolean. Enabled by default.
118
119       setsebool -P domain_fd_use 1
120
121
122
123       If  you  want to allow all domains to have the kernel load modules, you
124       must  turn  on  the  domain_kernel_load_modules  boolean.  Disabled  by
125       default.
126
127       setsebool -P domain_kernel_load_modules 1
128
129
130
131       If you want to allow all domains to execute in fips_mode, you must turn
132       on the fips_mode boolean. Enabled by default.
133
134       setsebool -P fips_mode 1
135
136
137
138       If you want to enable reading of urandom for all domains, you must turn
139       on the global_ssp boolean. Disabled by default.
140
141       setsebool -P global_ssp 1
142
143
144
145       If  you  want  to allow confined applications to run with kerberos, you
146       must turn on the kerberos_enabled boolean. Enabled by default.
147
148       setsebool -P kerberos_enabled 1
149
150
151
152       If you want to allow system to run with  NIS,  you  must  turn  on  the
153       nis_enabled boolean. Disabled by default.
154
155       setsebool -P nis_enabled 1
156
157
158
159       If  you  want to allow confined applications to use nscd shared memory,
160       you must turn on the nscd_use_shm boolean. Disabled by default.
161
162       setsebool -P nscd_use_shm 1
163
164
165

PORT TYPES

167       SELinux defines port types to represent TCP and UDP ports.
168
169       You can see the types associated with a port  by  using  the  following
170       command:
171
172       semanage port -l
173
174
175       Policy  governs  the  access  confined  processes  have to these ports.
176       SELinux pingd policy is very flexible allowing  users  to  setup  their
177       pingd processes in as secure a method as possible.
178
179       The following port types are defined for pingd:
180
181
182       pingd_port_t
183
184
185
186       Default Defined Ports:
187                 tcp 9125
188

MANAGED FILES

190       The SELinux process type pingd_t can manage files labeled with the fol‐
191       lowing file types.  The paths listed are the default  paths  for  these
192       file types.  Note the processes UID still need to have DAC permissions.
193
194       cluster_conf_t
195
196            /etc/cluster(/.*)?
197
198       cluster_var_lib_t
199
200            /var/lib/pcsd(/.*)?
201            /var/lib/cluster(/.*)?
202            /var/lib/openais(/.*)?
203            /var/lib/pengine(/.*)?
204            /var/lib/corosync(/.*)?
205            /usr/lib/heartbeat(/.*)?
206            /var/lib/heartbeat(/.*)?
207            /var/lib/pacemaker(/.*)?
208
209       cluster_var_run_t
210
211            /var/run/crm(/.*)?
212            /var/run/cman_.*
213            /var/run/rsctmp(/.*)?
214            /var/run/aisexec.*
215            /var/run/heartbeat(/.*)?
216            /var/run/corosync-qnetd(/.*)?
217            /var/run/corosync-qdevice(/.*)?
218            /var/run/cpglockd.pid
219            /var/run/corosync.pid
220            /var/run/rgmanager.pid
221            /var/run/cluster/rgmanager.sk
222
223       root_t
224
225            /sysroot/ostree/deploy/.*-atomic.*/deploy(/.*)?
226            /
227            /initrd
228
229

FILE CONTEXTS

231       SELinux requires files to have an extended attribute to define the file
232       type.
233
234       You can see the context of a file using the -Z option to ls
235
236       Policy governs the access  confined  processes  have  to  these  files.
237       SELinux  pingd  policy  is  very flexible allowing users to setup their
238       pingd processes in as secure a method as possible.
239
240       STANDARD FILE CONTEXT
241
242       SELinux defines the file context types for the pingd, if you wanted  to
243       store  files  with  these types in a diffent paths, you need to execute
244       the semanage command  to  sepecify  alternate  labeling  and  then  use
245       restorecon to put the labels on disk.
246
247       semanage fcontext -a -t pingd_modules_t '/srv/mypingd_content(/.*)?'
248       restorecon -R -v /srv/mypingd_content
249
250       Note:  SELinux  often  uses  regular expressions to specify labels that
251       match multiple files.
252
253       The following file types are defined for pingd:
254
255
256
257       pingd_etc_t
258
259       - Set files with the pingd_etc_t type, if you want to store pingd files
260       in the /etc directories.
261
262
263
264       pingd_exec_t
265
266       -  Set  files  with the pingd_exec_t type, if you want to transition an
267       executable to the pingd_t domain.
268
269
270
271       pingd_initrc_exec_t
272
273       - Set files with the pingd_initrc_exec_t type, if you want  to  transi‐
274       tion an executable to the pingd_initrc_t domain.
275
276
277
278       pingd_modules_t
279
280       -  Set  files  with  the pingd_modules_t type, if you want to treat the
281       files as pingd modules.
282
283
284
285       Note: File context can be temporarily modified with the chcon  command.
286       If  you want to permanently change the file context you need to use the
287       semanage fcontext command.  This will modify the SELinux labeling data‐
288       base.  You will need to use restorecon to apply the labels.
289
290

COMMANDS

292       semanage  fcontext  can also be used to manipulate default file context
293       mappings.
294
295       semanage permissive can also be used to manipulate  whether  or  not  a
296       process type is permissive.
297
298       semanage  module can also be used to enable/disable/install/remove pol‐
299       icy modules.
300
301       semanage port can also be used to manipulate the port definitions
302
303       semanage boolean can also be used to manipulate the booleans
304
305
306       system-config-selinux is a GUI tool available to customize SELinux pol‐
307       icy settings.
308
309

AUTHOR

311       This manual page was auto-generated using sepolicy manpage .
312
313

SEE ALSO

315       selinux(8), pingd(8), semanage(8), restorecon(8), chcon(1), sepolicy(8)
316       , setsebool(8)
317
318
319
320pingd                              19-04-25                   pingd_selinux(8)
Impressum