1pingd_selinux(8) SELinux Policy pingd pingd_selinux(8)
2
6 pingd_selinux - Security Enhanced Linux Policy for the pingd processes
7
9 Security-Enhanced Linux secures the pingd processes via flexible manda‐
10 tory access control.
11 The pingd processes execute with the pingd_t SELinux type. You can
13 check if you have these processes running by executing the ps command
14 with the -Z qualifier.
15 For example:
17 ps -eZ | grep pingd_t
19
23 The pingd_t SELinux type can be entered via the pingd_exec_t file type.
24 The default entrypoint paths for the pingd_t domain are the following:
26 /usr/sbin/pingd
28
30 SELinux defines process types (domains) for each process running on the
31 system
32 You can see the context of a process using the -Z option to ps
34 Policy governs the access confined processes have to files. SELinux
36 pingd policy is very flexible allowing users to setup their pingd pro‐
37 cesses in as secure a method as possible.
38 The following process types are defined for pingd:
40 ping_t, pingd_t
42 Note: semanage permissive -a pingd_t can be used to make the process
44 type pingd_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
50 SELinux policy is customizable based on least access required. pingd
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run pingd with the tightest access possible.
53 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58 setsebool -P fips_mode 1
60
64 SELinux defines port types to represent TCP and UDP ports.
65 You can see the types associated with a port by using the following
67 command:
68 semanage port -l
70 Policy governs the access confined processes have to these ports.
73 SELinux pingd policy is very flexible allowing users to setup their
74 pingd processes in as secure a method as possible.
75 The following port types are defined for pingd:
77 pingd_port_t
80 Default Defined Ports:
84 tcp 9125
85
87 The SELinux process type pingd_t can manage files labeled with the fol‐
88 lowing file types. The paths listed are the default paths for these
89 file types. Note the processes UID still need to have DAC permissions.
90 cluster_conf_t
92 /etc/cluster(/.*)?
94 cluster_var_lib_t
96 /var/lib/pcsd(/.*)?
98 /var/lib/cluster(/.*)?
99 /var/lib/openais(/.*)?
100 /var/lib/pengine(/.*)?
101 /var/lib/corosync(/.*)?
102 /usr/lib/heartbeat(/.*)?
103 /var/lib/heartbeat(/.*)?
104 /var/lib/pacemaker(/.*)?
105 cluster_var_run_t
107 /var/run/crm(/.*)?
109 /var/run/cman_.*
110 /var/run/rsctmp(/.*)?
111 /var/run/aisexec.*
112 /var/run/heartbeat(/.*)?
113 /var/run/pcsd-ruby.socket
114 /var/run/corosync-qnetd(/.*)?
115 /var/run/corosync-qdevice(/.*)?
116 /var/run/corosync.pid
117 /var/run/cpglockd.pid
118 /var/run/rgmanager.pid
119 /var/run/cluster/rgmanager.sk
120 krb5_host_rcache_t
122 /var/tmp/krb5_0.rcache2
124 /var/cache/krb5rcache(/.*)?
125 /var/tmp/nfs_0
126 /var/tmp/DNS_25
127 /var/tmp/host_0
128 /var/tmp/imap_0
129 /var/tmp/HTTP_23
130 /var/tmp/HTTP_48
131 /var/tmp/ldap_55
132 /var/tmp/ldap_487
133 /var/tmp/ldapmap1_0
134 root_t
136 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
138 /
139 /initrd
140
143 SELinux requires files to have an extended attribute to define the file
144 type.
145 You can see the context of a file using the -Z option to ls
147 Policy governs the access confined processes have to these files.
149 SELinux pingd policy is very flexible allowing users to setup their
150 pingd processes in as secure a method as possible.
151 STANDARD FILE CONTEXT
153 SELinux defines the file context types for the pingd, if you wanted to
155 store files with these types in a diffent paths, you need to execute
156 the semanage command to specify alternate labeling and then use re‐
157 storecon to put the labels on disk.
158 semanage fcontext -a -t pingd_modules_t '/srv/mypingd_content(/.*)?'
160 restorecon -R -v /srv/mypingd_content
161 Note: SELinux often uses regular expressions to specify labels that
163 match multiple files.
164 The following file types are defined for pingd:
166 pingd_etc_t
170 - Set files with the pingd_etc_t type, if you want to store pingd files
172 in the /etc directories.
173 pingd_exec_t
177 - Set files with the pingd_exec_t type, if you want to transition an
179 executable to the pingd_t domain.
180 pingd_initrc_exec_t
184 - Set files with the pingd_initrc_exec_t type, if you want to transi‐
186 tion an executable to the pingd_initrc_t domain.
187 pingd_modules_t
191 - Set files with the pingd_modules_t type, if you want to treat the
193 files as pingd modules.
194 Note: File context can be temporarily modified with the chcon command.
198 If you want to permanently change the file context you need to use the
199 semanage fcontext command. This will modify the SELinux labeling data‐
200 base. You will need to use restorecon to apply the labels.
201
204 semanage fcontext can also be used to manipulate default file context
205 mappings.
206 semanage permissive can also be used to manipulate whether or not a
208 process type is permissive.
209 semanage module can also be used to enable/disable/install/remove pol‐
211 icy modules.
212 semanage port can also be used to manipulate the port definitions
214 semanage boolean can also be used to manipulate the booleans
216 system-config-selinux is a GUI tool available to customize SELinux pol‐
219 icy settings.
220
223 This manual page was auto-generated using sepolicy manpage .
224
227 selinux(8), pingd(8), semanage(8), restorecon(8), chcon(1), sepol‐
228 icy(8), setsebool(8)
229pingd 22-05-27 pingd_selinux(8)