1FUSIONINVENTORY-NETDISCUOsVeErRYC(o1n)tributed Perl DocuFmUeSnItOaNtIiNoVnENTORY-NETDISCOVERY(1)
2
3
4
6 fusioninventory-netdiscovery - Standalone network discovery
7
9 fusioninventory-netdiscovery [options] --first <address> --last
10 <address>
11
12 Options:
13 --first <ADDRESS> IP range first address
14 --last <ADDRESS> IP range last address
15 --port <PORT[,PORT2]> SNMP port (161)
16 --protocol <PROT[,P2]> SNMP protocol/domain (udp/ipv4)
17 --community <STRING> SNMP community string (public)
18 --credentials <STRING> SNMP credentials (version:1,community:public)
19 --timeout <TIME SNMP timeout, in seconds (1)
20 --entity <ENTITY> GLPI entity
21 --threads <COUNT> number of discovery threads (1)
22 --control output control messages
23 --debug debug output
24 -h --help print this message and exit
25 --version print the task version and exit
26
28 fusioninventory-netdiscovery can be used to run a network discovery
29 task without a GLPI server.
30
32 --first ADDRESS
33 Set the first IP address of the network range to scan.
34
35 --last ADDRESS
36 Set the last IP address of the network range to scan.
37
38 --port PORT[,PORT2]
39 List of ports to try, defaults to: 161
40
41 Set it to 161,16100 to first try on default port and then on 16100.
42
43 --protocol PROTOCOL[,PROTOCOL2]
44 List of protocols to try, defaults to: udp/ipv4
45
46 Possible values are: udp/ipv4,udp/ipv6,tcp/ipv4,tcp/ipv6
47
48 --community STRING
49 Use given string as SNMP community (assume SNMPv1).
50
51 --credentials STRING
52 Use given string as SNMP credentials specification. This
53 specification is a comma-separated list of key:value authentication
54 parameters, such as:
55
56 · version:2c,community:public
57
58 · version:3,username:admin,authprotocol:sha,authpassword:s3cr3t
59
60 · etc.
61
62 --timeout TIME
63 Set SNMP timeout, in seconds.
64
65 --entity ENTITY
66 Set GLPI entity.
67
68 --threads COUNT
69 Use given number of inventory threads.
70
71 --control
72 Output server-agent control messages, in addition to inventory
73 result itself.
74
75 --debug
76 Turn the debug mode on. Multiple usage allowed, for additional
77 verbosity.
78
80 Run a discovery against a network range, using SNMP version 1:
81
82 $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
83 --community public
84
85 Run a discovery against a network range, using multiple SNMP
86 credentials:
87
88 $> fusioninventory-netdiscovery --first 192.168.0.1 --last 192.168.0.254 \
89 --credentials version:2c,community:public \
90 --credentials version:3,username:admin,authprotocol:sha,authpassword:s3cr3t
91
92
93
94perl v5.28.1 2018-10-12 FUSIONINVENTORY-NETDISCOVERY(1)