slapd_selinux(8)

1slapd_selinux(8)             SELinux Policy slapd             slapd_selinux(8)
2
3
4

NAME

6       slapd_selinux - Security Enhanced Linux Policy for the slapd processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the slapd processes via flexible manda‐
10       tory access control.
11
12       The slapd processes execute with the  slapd_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep slapd_t
19
20
21

ENTRYPOINTS

23       The slapd_t SELinux type can be entered via the slapd_exec_t file type.
24
25       The default entrypoint paths for the slapd_t domain are the following:
26
27       /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       slapd policy is very flexible allowing users to setup their slapd  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for slapd:
40
41       slapd_t
42
43       Note:  semanage  permissive  -a slapd_t can be used to make the process
44       type slapd_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   slapd
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run slapd with the tightest access possible.
53
54
55
56       If you want to allow all domains to execute in fips_mode, you must turn
57       on the fips_mode boolean. Enabled by default.
58
59       setsebool -P fips_mode 1
60
61
62
63       If  you  want  to allow confined applications to run with kerberos, you
64       must turn on the kerberos_enabled boolean. Disabled by default.
65
66       setsebool -P kerberos_enabled 1
67
68
69

MANAGED FILES

71       The SELinux process type slapd_t can manage files labeled with the fol‐
72       lowing  file  types.   The paths listed are the default paths for these
73       file types.  Note the processes UID still need to have DAC permissions.
74
75       auth_cache_t
76
77            /var/cache/coolkey(/.*)?
78
79       cluster_conf_t
80
81            /etc/cluster(/.*)?
82
83       cluster_var_lib_t
84
85            /var/lib/pcsd(/.*)?
86            /var/lib/cluster(/.*)?
87            /var/lib/openais(/.*)?
88            /var/lib/pengine(/.*)?
89            /var/lib/corosync(/.*)?
90            /usr/lib/heartbeat(/.*)?
91            /var/lib/heartbeat(/.*)?
92            /var/lib/pacemaker(/.*)?
93
94       cluster_var_run_t
95
96            /var/run/crm(/.*)?
97            /var/run/cman_.*
98            /var/run/rsctmp(/.*)?
99            /var/run/aisexec.*
100            /var/run/heartbeat(/.*)?
101            /var/run/corosync-qnetd(/.*)?
102            /var/run/corosync-qdevice(/.*)?
103            /var/run/corosync.pid
104            /var/run/cpglockd.pid
105            /var/run/rgmanager.pid
106            /var/run/cluster/rgmanager.sk
107
108       root_t
109
110            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
111            /
112            /initrd
113
114       security_t
115
116            /selinux
117
118       slapd_db_t
119
120            /var/lib/ldap(/.*)?
121            /etc/openldap/slapd.d(/.*)?
122            /var/lib/openldap-data(/.*)?
123            /var/lib/openldap-ldbm(/.*)?
124            /var/lib/openldap-slurpd(/.*)?
125
126       slapd_lock_t
127
128            /var/lock/subsys/ldap
129            /var/lock/subsys/slapd
130
131       slapd_log_t
132
133            /var/log/ldap.*
134            /var/log/slapd.*
135
136       slapd_replog_t
137
138            /var/lib/ldap/replog(/.*)?
139
140       slapd_tmpfs_t
141
142
143       slapd_var_run_t
144
145            /var/run/openldap(/.*)?
146            /var/run/ldapi
147            /var/run/slapd.pid
148            /var/run/slapd.args
149
150

FILE CONTEXTS

152       SELinux requires files to have an extended attribute to define the file
153       type.
154
155       You can see the context of a file using the -Z option to ls
156
157       Policy  governs  the  access  confined  processes  have to these files.
158       SELinux slapd policy is very flexible allowing  users  to  setup  their
159       slapd processes in as secure a method as possible.
160
161       EQUIVALENCE DIRECTORIES
162
163
164       slapd  policy  stores  data  with multiple different file context types
165       under the /var/lib/ldap directory.  If you would like to store the data
166       in  a different directory you can use the semanage command to create an
167       equivalence mapping.  If you wanted to store this data under  the  /srv
168       directory you would execute the following command:
169
170       semanage fcontext -a -e /var/lib/ldap /srv/ldap
171       restorecon -R -v /srv/ldap
172
173       STANDARD FILE CONTEXT
174
175       SELinux  defines the file context types for the slapd, if you wanted to
176       store files with these types in a diffent paths, you  need  to  execute
177       the  semanage  command  to  sepecify  alternate  labeling  and then use
178       restorecon to put the labels on disk.
179
180       semanage fcontext -a -t slapd_var_run_t '/srv/myslapd_content(/.*)?'
181       restorecon -R -v /srv/myslapd_content
182
183       Note: SELinux often uses regular expressions  to  specify  labels  that
184       match multiple files.
185
186       The following file types are defined for slapd:
187
188
189
190       slapd_cert_t
191
192       -  Set files with the slapd_cert_t type, if you want to treat the files
193       as slapd certificate data.
194
195
196
197       slapd_db_t
198
199       - Set files with the slapd_db_t type, if you want to treat the files as
200       slapd database content.
201
202
203       Paths:
204            /var/lib/ldap(/.*)?,  /etc/openldap/slapd.d(/.*)?, /var/lib/openl‐
205            dap-data(/.*)?,  /var/lib/openldap-ldbm(/.*)?,  /var/lib/openldap-
206            slurpd(/.*)?
207
208
209       slapd_etc_t
210
211       - Set files with the slapd_etc_t type, if you want to store slapd files
212       in the /etc directories.
213
214
215
216       slapd_exec_t
217
218       - Set files with the slapd_exec_t type, if you want  to  transition  an
219       executable to the slapd_t domain.
220
221
222       Paths:
223            /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
224
225
226       slapd_initrc_exec_t
227
228       -  Set  files with the slapd_initrc_exec_t type, if you want to transi‐
229       tion an executable to the slapd_initrc_t domain.
230
231
232
233       slapd_keytab_t
234
235       - Set files with the slapd_keytab_t type, if  you  want  to  treat  the
236       files as kerberos keytab files.
237
238
239
240       slapd_lock_t
241
242       -  Set files with the slapd_lock_t type, if you want to treat the files
243       as slapd lock data, stored under the /var/lock directory
244
245
246       Paths:
247            /var/lock/subsys/ldap, /var/lock/subsys/slapd
248
249
250       slapd_log_t
251
252       - Set files with the slapd_log_t type, if you want to treat the data as
253       slapd log data, usually stored under the /var/log directory.
254
255
256       Paths:
257            /var/log/ldap.*, /var/log/slapd.*
258
259
260       slapd_replog_t
261
262       -  Set  files  with  the  slapd_replog_t type, if you want to treat the
263       files as slapd replog data.
264
265
266
267       slapd_tmp_t
268
269       - Set files with the slapd_tmp_t type, if you want to store slapd  tem‐
270       porary files in the /tmp directories.
271
272
273
274       slapd_tmpfs_t
275
276       -  Set  files  with  the slapd_tmpfs_t type, if you want to store slapd
277       files on a tmpfs file system.
278
279
280
281       slapd_unit_file_t
282
283       - Set files with the slapd_unit_file_t type, if you want to  treat  the
284       files as slapd unit content.
285
286
287
288       slapd_var_run_t
289
290       -  Set  files  with  the slapd_var_run_t type, if you want to store the
291       slapd files under the /run or /var/run directory.
292
293
294       Paths:
295            /var/run/openldap(/.*)?,    /var/run/ldapi,    /var/run/slapd.pid,
296            /var/run/slapd.args
297
298
299       Note:  File context can be temporarily modified with the chcon command.
300       If you want to permanently change the file context you need to use  the
301       semanage fcontext command.  This will modify the SELinux labeling data‐
302       base.  You will need to use restorecon to apply the labels.
303
304

COMMANDS

306       semanage fcontext can also be used to manipulate default  file  context
307       mappings.
308
309       semanage  permissive  can  also  be used to manipulate whether or not a
310       process type is permissive.
311
312       semanage module can also be used to enable/disable/install/remove  pol‐
313       icy modules.
314
315       semanage boolean can also be used to manipulate the booleans
316
317
318       system-config-selinux is a GUI tool available to customize SELinux pol‐
319       icy settings.
320
321

AUTHOR

323       This manual page was auto-generated using sepolicy manpage .
324
325