slapd_selinux(8)

1slapd_selinux(8)             SELinux Policy slapd             slapd_selinux(8)
2
3
4

NAME

6       slapd_selinux - Security Enhanced Linux Policy for the slapd processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the slapd processes via flexible manda‐
10       tory access control.
11
12       The slapd processes execute with the  slapd_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep slapd_t
19
20
21

ENTRYPOINTS

23       The slapd_t SELinux type can be entered via the slapd_exec_t file type.
24
25       The default entrypoint paths for the slapd_t domain are the following:
26
27       /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       slapd policy is very flexible allowing users to setup their slapd  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for slapd:
40
41       slapd_t
42
43       Note:  semanage  permissive  -a slapd_t can be used to make the process
44       type slapd_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   slapd
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run slapd with the tightest access possible.
53
54
55
56       If you want to dontaudit all  daemons  scheduling  requests  (setsched,
57       sys_nice),  you  must turn on the daemons_dontaudit_scheduling boolean.
58       Enabled by default.
59
60       setsebool -P daemons_dontaudit_scheduling 1
61
62
63
64       If you want to allow all domains to execute in fips_mode, you must turn
65       on the fips_mode boolean. Enabled by default.
66
67       setsebool -P fips_mode 1
68
69
70
71       If  you  want  to allow confined applications to run with kerberos, you
72       must turn on the kerberos_enabled boolean. Enabled by default.
73
74       setsebool -P kerberos_enabled 1
75
76
77
78       If you want to allow system to run with  NIS,  you  must  turn  on  the
79       nis_enabled boolean. Disabled by default.
80
81       setsebool -P nis_enabled 1
82
83
84

MANAGED FILES

86       The SELinux process type slapd_t can manage files labeled with the fol‐
87       lowing file types.  The paths listed are the default  paths  for  these
88       file types.  Note the processes UID still need to have DAC permissions.
89
90       auth_cache_t
91
92            /var/cache/coolkey(/.*)?
93
94       cluster_conf_t
95
96            /etc/cluster(/.*)?
97
98       cluster_var_lib_t
99
100            /var/lib/pcsd(/.*)?
101            /var/lib/cluster(/.*)?
102            /var/lib/openais(/.*)?
103            /var/lib/pengine(/.*)?
104            /var/lib/corosync(/.*)?
105            /usr/lib/heartbeat(/.*)?
106            /var/lib/heartbeat(/.*)?
107            /var/lib/pacemaker(/.*)?
108
109       cluster_var_run_t
110
111            /var/run/crm(/.*)?
112            /var/run/cman_.*
113            /var/run/rsctmp(/.*)?
114            /var/run/aisexec.*
115            /var/run/heartbeat(/.*)?
116            /var/run/pcsd-ruby.socket
117            /var/run/corosync-qnetd(/.*)?
118            /var/run/corosync-qdevice(/.*)?
119            /var/run/corosync.pid
120            /var/run/cpglockd.pid
121            /var/run/rgmanager.pid
122            /var/run/cluster/rgmanager.sk
123
124       krb5_host_rcache_t
125
126            /var/tmp/krb5_0.rcache2
127            /var/cache/krb5rcache(/.*)?
128            /var/tmp/nfs_0
129            /var/tmp/DNS_25
130            /var/tmp/host_0
131            /var/tmp/imap_0
132            /var/tmp/HTTP_23
133            /var/tmp/HTTP_48
134            /var/tmp/ldap_55
135            /var/tmp/ldap_487
136            /var/tmp/ldapmap1_0
137
138       root_t
139
140            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
141            /
142            /initrd
143
144       security_t
145
146            /selinux
147
148       slapd_cert_t
149
150            /etc/openldap/certs(/.*)?
151
152       slapd_db_t
153
154            /var/lib/ldap(/.*)?
155            /etc/openldap/slapd.d(/.*)?
156            /var/lib/openldap-data(/.*)?
157            /var/lib/openldap-ldbm(/.*)?
158            /var/lib/openldap-slurpd(/.*)?
159
160       slapd_lock_t
161
162            /var/lock/subsys/ldap
163            /var/lock/subsys/slapd
164
165       slapd_log_t
166
167            /var/log/ldap.*
168            /var/log/slapd.*
169
170       slapd_replog_t
171
172            /var/lib/ldap/replog(/.*)?
173
174       slapd_tmp_t
175
176
177       slapd_tmpfs_t
178
179
180       slapd_var_run_t
181
182            /var/run/openldap(/.*)?
183            /var/run/ldapi
184            /var/run/slapd.pid
185            /var/run/slapd.args
186
187

FILE CONTEXTS

189       SELinux requires files to have an extended attribute to define the file
190       type.
191
192       You can see the context of a file using the -Z option to ls
193
194       Policy governs the access  confined  processes  have  to  these  files.
195       SELinux  slapd  policy  is  very flexible allowing users to setup their
196       slapd processes in as secure a method as possible.
197
198       EQUIVALENCE DIRECTORIES
199
200
201       slapd policy stores data with multiple different file context types un‐
202       der  the  /var/lib/ldap directory.  If you would like to store the data
203       in a different directory you can use the semanage command to create  an
204       equivalence  mapping.   If you wanted to store this data under the /srv
205       directory you would execute the following command:
206
207       semanage fcontext -a -e /var/lib/ldap /srv/ldap
208       restorecon -R -v /srv/ldap
209
210       STANDARD FILE CONTEXT
211
212       SELinux defines the file context types for the slapd, if you wanted  to
213       store  files with these types in a different paths, you need to execute
214       the semanage command to specify alternate labeling  and  then  use  re‐
215       storecon to put the labels on disk.
216
217       semanage fcontext -a -t slapd_exec_t '/srv/slapd/content(/.*)?'
218       restorecon -R -v /srv/myslapd_content
219
220       Note:  SELinux  often  uses  regular expressions to specify labels that
221       match multiple files.
222
223       The following file types are defined for slapd:
224
225
226
227       slapd_cert_t
228
229       - Set files with the slapd_cert_t type, if you want to treat the  files
230       as slapd certificate data.
231
232
233
234       slapd_db_t
235
236       - Set files with the slapd_db_t type, if you want to treat the files as
237       slapd database content.
238
239
240       Paths:
241            /var/lib/ldap(/.*)?, /etc/openldap/slapd.d(/.*)?,  /var/lib/openl‐
242            dap-data(/.*)?,  /var/lib/openldap-ldbm(/.*)?,  /var/lib/openldap-
243            slurpd(/.*)?
244
245
246       slapd_etc_t
247
248       - Set files with the slapd_etc_t type, if you want to store slapd files
249       in the /etc directories.
250
251
252
253       slapd_exec_t
254
255       -  Set  files  with the slapd_exec_t type, if you want to transition an
256       executable to the slapd_t domain.
257
258
259       Paths:
260            /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
261
262
263       slapd_initrc_exec_t
264
265       - Set files with the slapd_initrc_exec_t type, if you want  to  transi‐
266       tion an executable to the slapd_initrc_t domain.
267
268
269
270       slapd_keytab_t
271
272       -  Set  files  with  the  slapd_keytab_t type, if you want to treat the
273       files as kerberos keytab files.
274
275
276
277       slapd_lock_t
278
279       - Set files with the slapd_lock_t type, if you want to treat the  files
280       as slapd lock data, stored under the /var/lock directory
281
282
283       Paths:
284            /var/lock/subsys/ldap, /var/lock/subsys/slapd
285
286
287       slapd_log_t
288
289       - Set files with the slapd_log_t type, if you want to treat the data as
290       slapd log data, usually stored under the /var/log directory.
291
292
293       Paths:
294            /var/log/ldap.*, /var/log/slapd.*
295
296
297       slapd_replog_t
298
299       - Set files with the slapd_replog_t type, if  you  want  to  treat  the
300       files as slapd replog data.
301
302
303
304       slapd_tmp_t
305
306       -  Set files with the slapd_tmp_t type, if you want to store slapd tem‐
307       porary files in the /tmp directories.
308
309
310
311       slapd_tmpfs_t
312
313       - Set files with the slapd_tmpfs_t type, if you  want  to  store  slapd
314       files on a tmpfs file system.
315
316
317
318       slapd_unit_file_t
319
320       -  Set  files with the slapd_unit_file_t type, if you want to treat the
321       files as slapd unit content.
322
323
324
325       slapd_var_run_t
326
327       - Set files with the slapd_var_run_t type, if you  want  to  store  the
328       slapd files under the /run or /var/run directory.
329
330
331       Paths:
332            /var/run/openldap(/.*)?,    /var/run/ldapi,    /var/run/slapd.pid,
333            /var/run/slapd.args
334
335
336       Note: File context can be temporarily modified with the chcon  command.
337       If  you want to permanently change the file context you need to use the
338       semanage fcontext command.  This will modify the SELinux labeling data‐
339       base.  You will need to use restorecon to apply the labels.
340
341

COMMANDS

343       semanage  fcontext  can also be used to manipulate default file context
344       mappings.
345
346       semanage permissive can also be used to manipulate  whether  or  not  a
347       process type is permissive.
348
349       semanage  module can also be used to enable/disable/install/remove pol‐
350       icy modules.
351
352       semanage boolean can also be used to manipulate the booleans
353
354
355       system-config-selinux is a GUI tool available to customize SELinux pol‐
356       icy settings.
357
358

AUTHOR

360       This manual page was auto-generated using sepolicy manpage .
361
362