1cgconfig_selinux(8) SELinux Policy cgconfig cgconfig_selinux(8)
2
6 cgconfig_selinux - Security Enhanced Linux Policy for the cgconfig pro‐
7 cesses
8
10 Security-Enhanced Linux secures the cgconfig processes via flexible
11 mandatory access control.
12 The cgconfig processes execute with the cgconfig_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep cgconfig_t
20
24 The cgconfig_t SELinux type can be entered via the cgconfig_exec_t file
25 type.
26 The default entrypoint paths for the cgconfig_t domain are the follow‐
28 ing:
29 /sbin/cgconfigparser, /usr/sbin/cgconfigparser
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 cgconfig policy is very flexible allowing users to setup their cgconfig
40 processes in as secure a method as possible.
41 The following process types are defined for cgconfig:
43 cgconfig_t
45 Note: semanage permissive -a cgconfig_t can be used to make the process
47 type cgconfig_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
53 SELinux policy is customizable based on least access required. cgcon‐
54 fig policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run cgconfig with the tightest access
56 possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type cgconfig_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cgroup_t
80 /sys/fs/cgroup
82 cluster_conf_t
84 /etc/cluster(/.*)?
86 cluster_var_lib_t
88 /var/lib/pcsd(/.*)?
90 /var/lib/cluster(/.*)?
91 /var/lib/openais(/.*)?
92 /var/lib/pengine(/.*)?
93 /var/lib/corosync(/.*)?
94 /usr/lib/heartbeat(/.*)?
95 /var/lib/heartbeat(/.*)?
96 /var/lib/pacemaker(/.*)?
97 cluster_var_run_t
99 /var/run/crm(/.*)?
101 /var/run/cman_.*
102 /var/run/rsctmp(/.*)?
103 /var/run/aisexec.*
104 /var/run/heartbeat(/.*)?
105 /var/run/corosync-qnetd(/.*)?
106 /var/run/corosync-qdevice(/.*)?
107 /var/run/corosync.pid
108 /var/run/cpglockd.pid
109 /var/run/rgmanager.pid
110 /var/run/cluster/rgmanager.sk
111 root_t
113 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
115 /
116 /initrd
117
120 SELinux requires files to have an extended attribute to define the file
121 type.
122 You can see the context of a file using the -Z option to ls
124 Policy governs the access confined processes have to these files.
126 SELinux cgconfig policy is very flexible allowing users to setup their
127 cgconfig processes in as secure a method as possible.
128 STANDARD FILE CONTEXT
130 SELinux defines the file context types for the cgconfig, if you wanted
132 to store files with these types in a diffent paths, you need to execute
133 the semanage command to sepecify alternate labeling and then use
134 restorecon to put the labels on disk.
135 semanage fcontext -a -t cgconfig_etc_t '/srv/mycgconfig_content(/.*)?'
137 restorecon -R -v /srv/mycgconfig_content
138 Note: SELinux often uses regular expressions to specify labels that
140 match multiple files.
141 The following file types are defined for cgconfig:
143 cgconfig_etc_t
147 - Set files with the cgconfig_etc_t type, if you want to store cgconfig
149 files in the /etc directories.
150 Paths:
153 /etc/cgconfig.conf, /etc/sysconfig/cgconfig
154 cgconfig_exec_t
157 - Set files with the cgconfig_exec_t type, if you want to transition an
159 executable to the cgconfig_t domain.
160 Paths:
163 /sbin/cgconfigparser, /usr/sbin/cgconfigparser
164 cgconfig_initrc_exec_t
167 - Set files with the cgconfig_initrc_exec_t type, if you want to tran‐
169 sition an executable to the cgconfig_initrc_t domain.
170 Note: File context can be temporarily modified with the chcon command.
174 If you want to permanently change the file context you need to use the
175 semanage fcontext command. This will modify the SELinux labeling data‐
176 base. You will need to use restorecon to apply the labels.
177
180 semanage fcontext can also be used to manipulate default file context
181 mappings.
182 semanage permissive can also be used to manipulate whether or not a
184 process type is permissive.
185 semanage module can also be used to enable/disable/install/remove pol‐
187 icy modules.
188 semanage boolean can also be used to manipulate the booleans
190 system-config-selinux is a GUI tool available to customize SELinux pol‐
193 icy settings.
194
197 This manual page was auto-generated using sepolicy manpage .
198
201 selinux(8), cgconfig(8), semanage(8), restorecon(8), chcon(1), sepol‐
202 icy(8), setsebool(8)
203cgconfig 21-03-26 cgconfig_selinux(8)