1piranha_pulse_selinux(8) SELinux Policy piranha_pulse piranha_pulse_selinux(8)
2
6 piranha_pulse_selinux - Security Enhanced Linux Policy for the
7 piranha_pulse processes
8
10 Security-Enhanced Linux secures the piranha_pulse processes via flexi‐
11 ble mandatory access control.
12 The piranha_pulse processes execute with the piranha_pulse_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep piranha_pulse_t
20
24 The piranha_pulse_t SELinux type can be entered via the
25 piranha_pulse_exec_t file type.
26 The default entrypoint paths for the piranha_pulse_t domain are the
28 following:
29 /usr/sbin/pulse
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 piranha_pulse policy is very flexible allowing users to setup their
40 piranha_pulse processes in as secure a method as possible.
41 The following process types are defined for piranha_pulse:
43 piranha_pulse_t
45 Note: semanage permissive -a piranha_pulse_t can be used to make the
47 process type piranha_pulse_t permissive. SELinux does not deny access
48 to permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 piranha_pulse policy is extremely flexible and has several booleans
55 that allow you to manipulate the policy and run piranha_pulse with the
56 tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type piranha_pulse_t can manage files labeled with
69 the following file types. The paths listed are the default paths for
70 these file types. Note the processes UID still need to have DAC per‐
71 missions.
72 cluster_conf_t
74 /etc/cluster(/.*)?
76 cluster_var_lib_t
78 /var/lib/pcsd(/.*)?
80 /var/lib/cluster(/.*)?
81 /var/lib/openais(/.*)?
82 /var/lib/pengine(/.*)?
83 /var/lib/corosync(/.*)?
84 /usr/lib/heartbeat(/.*)?
85 /var/lib/heartbeat(/.*)?
86 /var/lib/pacemaker(/.*)?
87 cluster_var_run_t
89 /var/run/crm(/.*)?
91 /var/run/cman_.*
92 /var/run/rsctmp(/.*)?
93 /var/run/aisexec.*
94 /var/run/heartbeat(/.*)?
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101 piranha_pulse_var_run_t
103 /var/run/pulse.pid
105 piranha_tmpfs
107 root_t
110 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
112 /
113 /initrd
114 systemd_passwd_var_run_t
116 /var/run/systemd/ask-password(/.*)?
118 /var/run/systemd/ask-password-block(/.*)?
119
122 SELinux requires files to have an extended attribute to define the file
123 type.
124 You can see the context of a file using the -Z option to ls
126 Policy governs the access confined processes have to these files.
128 SELinux piranha_pulse policy is very flexible allowing users to setup
129 their piranha_pulse processes in as secure a method as possible.
130 STANDARD FILE CONTEXT
132 SELinux defines the file context types for the piranha_pulse, if you
134 wanted to store files with these types in a diffent paths, you need to
135 execute the semanage command to sepecify alternate labeling and then
136 use restorecon to put the labels on disk.
137 semanage fcontext -a -t piranha_pulse_var_run_t '/srv/mypi‐
139 ranha_pulse_content(/.*)?'
140 restorecon -R -v /srv/mypiranha_pulse_content
141 Note: SELinux often uses regular expressions to specify labels that
143 match multiple files.
144 The following file types are defined for piranha_pulse:
146 piranha_pulse_exec_t
150 - Set files with the piranha_pulse_exec_t type, if you want to transi‐
152 tion an executable to the piranha_pulse_t domain.
153 piranha_pulse_initrc_exec_t
157 - Set files with the piranha_pulse_initrc_exec_t type, if you want to
159 transition an executable to the piranha_pulse_initrc_t domain.
160 piranha_pulse_tmpfs_t
164 - Set files with the piranha_pulse_tmpfs_t type, if you want to store
166 piranha pulse files on a tmpfs file system.
167 piranha_pulse_var_run_t
171 - Set files with the piranha_pulse_var_run_t type, if you want to store
173 the piranha pulse files under the /run or /var/run directory.
174 Note: File context can be temporarily modified with the chcon command.
178 If you want to permanently change the file context you need to use the
179 semanage fcontext command. This will modify the SELinux labeling data‐
180 base. You will need to use restorecon to apply the labels.
181
184 semanage fcontext can also be used to manipulate default file context
185 mappings.
186 semanage permissive can also be used to manipulate whether or not a
188 process type is permissive.
189 semanage module can also be used to enable/disable/install/remove pol‐
191 icy modules.
192 semanage boolean can also be used to manipulate the booleans
194 system-config-selinux is a GUI tool available to customize SELinux pol‐
197 icy settings.
198
201 This manual page was auto-generated using sepolicy manpage .
202
205 selinux(8), piranha_pulse(8), semanage(8), restorecon(8), chcon(1),
206 sepolicy(8), setsebool(8)
207piranha_pulse 21-03-26 piranha_pulse_selinux(8)