1tlp_selinux(8) SELinux Policy tlp tlp_selinux(8)
2
3
4
6 tlp_selinux - Security Enhanced Linux Policy for the tlp processes
7
9 Security-Enhanced Linux secures the tlp processes via flexible manda‐
10 tory access control.
11
12 The tlp processes execute with the tlp_t SELinux type. You can check if
13 you have these processes running by executing the ps command with the
14 -Z qualifier.
15
16 For example:
17
18 ps -eZ | grep tlp_t
19
20
21
23 The tlp_t SELinux type can be entered via the tlp_exec_t file type.
24
25 The default entrypoint paths for the tlp_t domain are the following:
26
27 /usr/sbin/tlp, /usr/lib/systemd/system-sleep/tlp
28
30 SELinux defines process types (domains) for each process running on the
31 system
32
33 You can see the context of a process using the -Z option to ps
34
35 Policy governs the access confined processes have to files. SELinux
36 tlp policy is very flexible allowing users to setup their tlp processes
37 in as secure a method as possible.
38
39 The following process types are defined for tlp:
40
41 tlp_t
42
43 Note: semanage permissive -a tlp_t can be used to make the process type
44 tlp_t permissive. SELinux does not deny access to permissive process
45 types, but the AVC (SELinux denials) messages are still generated.
46
47
49 SELinux policy is customizable based on least access required. tlp
50 policy is extremely flexible and has several booleans that allow you to
51 manipulate the policy and run tlp with the tightest access possible.
52
53
54
55 If you want to allow all domains to execute in fips_mode, you must turn
56 on the fips_mode boolean. Enabled by default.
57
58 setsebool -P fips_mode 1
59
60
61
63 The SELinux process type tlp_t can manage files labeled with the fol‐
64 lowing file types. The paths listed are the default paths for these
65 file types. Note the processes UID still need to have DAC permissions.
66
67 cluster_conf_t
68
69 /etc/cluster(/.*)?
70
71 cluster_var_lib_t
72
73 /var/lib/pcsd(/.*)?
74 /var/lib/cluster(/.*)?
75 /var/lib/openais(/.*)?
76 /var/lib/pengine(/.*)?
77 /var/lib/corosync(/.*)?
78 /usr/lib/heartbeat(/.*)?
79 /var/lib/heartbeat(/.*)?
80 /var/lib/pacemaker(/.*)?
81
82 cluster_var_run_t
83
84 /var/run/crm(/.*)?
85 /var/run/cman_.*
86 /var/run/rsctmp(/.*)?
87 /var/run/aisexec.*
88 /var/run/heartbeat(/.*)?
89 /var/run/corosync-qnetd(/.*)?
90 /var/run/corosync-qdevice(/.*)?
91 /var/run/corosync.pid
92 /var/run/cpglockd.pid
93 /var/run/rgmanager.pid
94 /var/run/cluster/rgmanager.sk
95
96 root_t
97
98 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
99 /
100 /initrd
101
102 sysfs_t
103
104 /sys(/.*)?
105
106 tlp_var_lib_t
107
108 /var/lib/tlp(/.*)?
109
110 tlp_var_run_t
111
112 /var/run/tlp(/.*)?
113
114
116 SELinux requires files to have an extended attribute to define the file
117 type.
118
119 You can see the context of a file using the -Z option to ls
120
121 Policy governs the access confined processes have to these files.
122 SELinux tlp policy is very flexible allowing users to setup their tlp
123 processes in as secure a method as possible.
124
125 STANDARD FILE CONTEXT
126
127 SELinux defines the file context types for the tlp, if you wanted to
128 store files with these types in a diffent paths, you need to execute
129 the semanage command to sepecify alternate labeling and then use
130 restorecon to put the labels on disk.
131
132 semanage fcontext -a -t tlp_unit_file_t '/srv/mytlp_content(/.*)?'
133 restorecon -R -v /srv/mytlp_content
134
135 Note: SELinux often uses regular expressions to specify labels that
136 match multiple files.
137
138 The following file types are defined for tlp:
139
140
141
142 tlp_exec_t
143
144 - Set files with the tlp_exec_t type, if you want to transition an exe‐
145 cutable to the tlp_t domain.
146
147
148 Paths:
149 /usr/sbin/tlp, /usr/lib/systemd/system-sleep/tlp
150
151
152 tlp_unit_file_t
153
154 - Set files with the tlp_unit_file_t type, if you want to treat the
155 files as tlp unit content.
156
157
158
159 tlp_var_lib_t
160
161 - Set files with the tlp_var_lib_t type, if you want to store the tlp
162 files under the /var/lib directory.
163
164
165
166 tlp_var_run_t
167
168 - Set files with the tlp_var_run_t type, if you want to store the tlp
169 files under the /run or /var/run directory.
170
171
172
173 Note: File context can be temporarily modified with the chcon command.
174 If you want to permanently change the file context you need to use the
175 semanage fcontext command. This will modify the SELinux labeling data‐
176 base. You will need to use restorecon to apply the labels.
177
178
180 semanage fcontext can also be used to manipulate default file context
181 mappings.
182
183 semanage permissive can also be used to manipulate whether or not a
184 process type is permissive.
185
186 semanage module can also be used to enable/disable/install/remove pol‐
187 icy modules.
188
189 semanage boolean can also be used to manipulate the booleans
190
191
192 system-config-selinux is a GUI tool available to customize SELinux pol‐
193 icy settings.
194
195
197 This manual page was auto-generated using sepolicy manpage .
198
199
201 selinux(8), tlp(8), semanage(8), restorecon(8), chcon(1), sepolicy(8),
202 setsebool(8)
203
204
205
206tlp 21-03-26 tlp_selinux(8)