1sane-ricoh(5)            SANE Scanner Access Now Easy            sane-ricoh(5)
2
3
4

NAME

6       sane-ricoh - SANE backend for Ricoh flatbed scanners
7

DESCRIPTION

9       The  sane-ricoh  library  implements  a  SANE (Scanner Access Now Easy)
10       backend that provides access to the following Ricoh flatbed scanners:
11
12              IS50
13              IS60
14

DEVICE NAMES

16       This backend expects device names of the form:
17
18              special
19
20       Where special is the path-name for the special device that  corresponds
21       to  a  SCSI  scanner.  The  special  device name must be a generic SCSI
22       device or a symlink to such a device.  The program sane-find-scanner(1)
23       helps  to  find out the correct device. Under Linux, such a device name
24       could be /dev/sga or  /dev/sge,  for  example.   See  sane-scsi(5)  for
25       details.
26
27

FILES

29       /etc/sane.d/ricoh.conf
30              The   backend   configuration  file  (see  also  description  of
31              SANE_CONFIG_DIR below).
32
33       /usr/lib64/sane/libsane-ricoh.a
34              The static library implementing this backend.
35
36       /usr/lib64/sane/libsane-ricoh.so
37              The shared library implementing this backend (present on systems
38              that support dynamic loading).
39

ENVIRONMENT

41       SANE_CONFIG_DIR
42              This environment variable specifies the list of directories that
43              may contain the configuration file.  Under UNIX, the directories
44              are  separated  by a colon (`:'), under OS/2, they are separated
45              by a semi-colon (`;').  If this variable is not set, the config‐
46              uration  file is searched in two default directories: first, the
47              current working directory (".") and then in /etc/sane.d.  If the
48              value  of the environment variable ends with the directory sepa‐
49              rator character, then the default directories are searched after
50              the  explicitly  specified  directories.   For  example, setting
51              SANE_CONFIG_DIR to "/tmp/config:" would  result  in  directories
52              tmp/config, ., and /etc/sane.d being searched (in this order).
53
54       SANE_DEBUG_RICOH
55              If  the  library  was  compiled with debug support enabled, this
56              environment variable controls the debug level for this  backend.
57              Higher debug levels increase the verbosity of the output.
58
59              Example: export SANE_DEBUG_RICOH=4
60
61

SEE ALSO

63       sane(7), sane-scsi(5), sane-find-scanner(1)
64
65

AUTHOR

67       Feico W. Dillema
68
69
70
71                                  14 Jul 2008                    sane-ricoh(5)
Impressum