1sane-ricoh(5)            SANE Scanner Access Now Easy            sane-ricoh(5)
2
3
4

NAME

6       sane-ricoh - SANE backend for Ricoh flatbed scanners
7

DESCRIPTION

9       The  sane-ricoh  library  implements  a  SANE (Scanner Access Now Easy)
10       backend that provides access to the following Ricoh flatbed scanners:
11
12              IS50
13              IS60
14

DEVICE NAMES

16       This backend expects device names of the form:
17
18              special
19
20       Where special is the path-name for the special device that  corresponds
21       to  a  SCSI scanner. The special device name must be a generic SCSI de‐
22       vice or a symlink to such a device.  The  program  sane-find-scanner(1)
23       helps  to  find out the correct device. Under Linux, such a device name
24       could be /dev/sga or /dev/sge, for example.  See sane-scsi(5)  for  de‐
25       tails.
26
27

FILES

29       /etc/sane.d/ricoh.conf
30              The   backend   configuration  file  (see  also  description  of
31              SANE_CONFIG_DIR below).
32
33       /usr/lib64/sane/libsane-ricoh.a
34              The static library implementing this backend.
35
36       /usr/lib64/sane/libsane-ricoh.so
37              The shared library implementing this backend (present on systems
38              that support dynamic loading).
39

ENVIRONMENT

41       SANE_CONFIG_DIR
42              This environment variable specifies the list of directories that
43              may contain the configuration file.  On *NIX systems, the direc‐
44              tories are separated by a colon (`:'), under OS/2, they are sep‐
45              arated by a semi-colon (`;').  If this variable is not set,  the
46              configuration  file  is  searched  in  two  default directories:
47              first,  the  current  working  directory  (".")  and   then   in
48              /etc/sane.d.  If the value of the environment variable ends with
49              the directory separator character, then the default  directories
50              are  searched  after  the explicitly specified directories.  For
51              example, setting SANE_CONFIG_DIR to "/tmp/config:" would  result
52              in directories tmp/config, ., and /etc/sane.d being searched (in
53              this order).
54
55       SANE_DEBUG_RICOH
56              If the library was compiled with debug support enabled, this en‐
57              vironment  variable  controls  the debug level for this backend.
58              Higher debug levels increase the verbosity of the output.
59
60              Example: export SANE_DEBUG_RICOH=4
61
62

SEE ALSO

64       sane(7), sane-scsi(5), sane-find-scanner(1)
65
66

AUTHOR

68       Feico W. Dillema
69
70
71
72                                  14 Jul 2008                    sane-ricoh(5)
Impressum