1sway-output(5) File Formats Manual sway-output(5)
2
6 sway-output - output configuration commands for sway
7
9 You may combine output commands into one, like so:
10 output HDMI-A-1 mode 1920x1080 pos 1920 0 bg ~/wallpaper.png
12 stretch
13 You can get a list of output names with swaymsg -t get_outputs. You may
15 also match any output by using the output name "*". Additionally, "-"
16 can be used to match the focused output by name and "--" can be used to
17 match the focused output by its identifier.
18 Some outputs may have different names when disconnecting and reconnect‐
20 ing. To identify these, the name can be substituted for a string con‐
21 sisting of the make, model and serial which you can get from swaymsg -t
22 get_outputs. Each value must be separated by one space. For example:
23 output "Some Company ABC123 0x00000000" pos 1920 0
25
27 output <name> mode|resolution|res [--custom] <WIDTHxHEIGHT>[@<RATE>Hz]
28 Configures the specified output to use the given mode. Modes are a
29 combination of width and height (in pixels) and a refresh rate that
30 your display can be configured to use. For a list of available
31 modes for each output, use swaymsg -t get_outputs.
32 To set a custom mode not listed in the list of available modes, use
34 --custom. You should probably only use this if you know what you're
35 doing.
36 Examples:
38 output HDMI-A-1 mode 1920x1080
40 output HDMI-A-1 mode 1920x1080@60Hz
42 output <name> position|pos <X> <Y>
44 Places the specified output at the specific position in the global
45 coordinate space. The cursor may only be moved between immediately
46 adjacent outputs. If scaling is active, it has to be considered
47 when positioning. For example, if the scaling factor for the left
48 output is 2, the relative position for the right output has to be
49 divided by 2. The reference point is the top left corner so if you
50 want the bottoms aligned this has to be considered as well.
51 Example:
53 output HDMI1 scale 2
55 output HDMI1 pos 0 1020 res 3200x1800
57 output eDP1 pos 1600 0 res 1920x1080
59 Note that the left x-pos of eDP1 is 1600 = 3200/2 and the bottom y-
61 pos is 1020 + (1800 / 2) = 1920 = 0 + 1920
62 output <name> scale <factor>
64 Scales the specified output by the specified scale factor. An inte‐
65 ger is recommended, but fractional values are also supported. If a
66 fractional value are specified, be warned that it is not possible
67 to faithfully represent the contents of your windows - they will be
68 rendered at the next highest integer scale factor and downscaled.
69 You may be better served by setting an integer scale factor and ad‐
70 justing the font size of your applications to taste. HiDPI isn't
71 supported with Xwayland clients (windows will blur).
72 output <name> scale_filter linear|nearest|smart
74 Indicates how to scale application buffers that are rendered at a
75 scale lower than the output's configured scale, such as lo-dpi ap‐
76 plications on hi-dpi screens. Linear is smoother and blurrier,
77 nearest (also known as nearest neighbor) is sharper and blockier.
78 Setting "smart" will apply nearest scaling when the output has an
79 integer scale factor, otherwise linear. The default is "smart".
80 output <name> subpixel rgb|bgr|vrgb|vbgr|none
82 Manually sets the subpixel hinting for the specified output. This
83 value is usually auto-detected, but some displays may misreport
84 their subpixel geometry. Using the correct subpixel hinting allows
85 for sharper text. Incorrect values will result in blurrier text.
86 When changing this via swaymsg, some applications may need to be
87 restarted to use the new value.
88 output <name> background|bg <file> <mode> [<fallback_color>]
90 Sets the wallpaper for the given output to the specified file, us‐
91 ing the given scaling mode (one of "stretch", "fill", "fit", "cen‐
92 ter", "tile"). If the specified file cannot be accessed or if the
93 image does not fill the entire output, a fallback color may be pro‐
94 vided to cover the rest of the output. fallback_color should be
95 specified as #RRGGBB. Alpha is not supported.
96 output <name> background|bg <color> solid_color
98 Sets the background of the given output to the specified color.
99 color should be specified as #RRGGBB. Alpha is not supported.
100 output <name> transform <transform> [clockwise|anticlockwise]
102 Sets the background transform to the given value. Can be one of
103 "90", "180", "270" for rotation; or "flipped", "flipped-90",
104 "flipped-180", "flipped-270" to apply a rotation and flip, or "nor‐
105 mal" to apply no transform. The rotation is performed clockwise. If
106 a single output is chosen and a rotation direction is specified
107 (clockwise or anticlockwise) then the transform is added or sub‐
108 tracted from the current transform (this cannot be used directly in
109 the configuration file).
110 output <name> disable|enable
112 Enables or disables the specified output (all outputs are enabled
113 by default).
114 output <name> toggle
116 Toggle the specified output.
117 output <name> dpms on|off
119 Enables or disables the specified output via DPMS. To turn an out‐
120 put off (ie. blank the screen but keep workspaces as-is), one can
121 set DPMS to off.
122 output <name> max_render_time off|<msec>
124 Controls when sway composites the output, as a positive number of
125 milliseconds before the next display refresh. A smaller number
126 leads to fresher composited frames and lower perceived input la‐
127 tency, but if set too low, sway may not finish compositing in time
128 for display refresh, leading to delayed frames.
129 When set to off, sway composites immediately after display refresh,
131 maximizing time available for compositing.
132 To adjust when applications are instructed to render, see max_ren‐
134 der_time in sway(5).
135 To set this up for optimal latency:
137 1. Launch some full-screen application that renders continuously,
138 like glxgears.
139 2. Start with max_render_time 1. Increment by 1 if you see frame
140 drops.
141 This setting only has an effect on Wayland and DRM backends, as
144 support for presentation timestamps and predicted output refresh
145 rate is required.
146 output <name> adaptive_sync on|off
148 Enables or disables adaptive synchronization (often referred to as
149 Variable Refresh Rate, or by the vendor-specific names FreeSync/G-
150 Sync).
151 Adaptive sync allows clients to submit frames a little to late
153 without having to wait a whole refresh period to display it on
154 screen. Enabling adaptive sync can improve latency, but can cause
155 flickering on some hardware.
156
158 sway(5) sway-input(5)
159 2021-04-07 sway-output(5)