1sway-output(5) File Formats Manual sway-output(5)
2
6 sway-output - output configuration commands for sway
7
9 You may combine output commands into one, like so:
10 output HDMI-A-1 mode 1920x1080 pos 1920 0 bg ~/wallpaper.png
12 stretch
13 You can get a list of output names with swaymsg -t get_outputs. You may
15 also match any output by using the output name "*". Additionally, "-"
16 can be used to match the focused output by name and "--" can be used to
17 match the focused output by its identifier.
18 Some outputs may have different names when disconnecting and reconnect‐
20 ing. To identify these, the name can be substituted for a string con‐
21 sisting of the make, model and serial which you can get from swaymsg -t
22 get_outputs. Each value must be separated by one space. For example:
23 output "Some Company ABC123 0x00000000" pos 1920 0
25
27 output <name> mode|resolution|res [--custom]
28 <width>x<height>[@<rate>Hz]
29 Configures the specified output to use the given mode. Modes are a
30 combination of width and height (in pixels) and a refresh rate that
31 your display can be configured to use. For a list of available
32 modes for each output, use swaymsg -t get_outputs.
33 To set a custom mode not listed in the list of available modes, use
35 --custom. You should probably only use this if you know what you're
36 doing.
37 Examples:
39 output HDMI-A-1 mode 1920x1080
41 output HDMI-A-1 mode 1920x1080@60Hz
43 output <name> modeline <clock> <hdisplay> <hsync_start> <hsync_end>
45 <htotal> <vdisplay> <vsync_start> <vsync_end> <vtotal> <hsync> <vsync>
46 Configures the specified output to use the given modeline. It can
47 be generated using cvt(1) and gtf(1) commands. See xorg.conf(5).
48 Only supported on DRM backend.
49 Example:
51 output HDMI-A-1 modeline 173.00 1920 2048 2248 2576 1080 1083
53 1088 1120 -hsync +vsync
54 output <name> position|pos <X> <Y>
56 Places the specified output at the specific position in the global
57 coordinate space. The cursor may only be moved between immediately
58 adjacent outputs. If scaling is active, it has to be considered
59 when positioning. For example, if the scaling factor for the left
60 output is 2, the relative position for the right output has to be
61 divided by 2. The reference point is the top left corner so if you
62 want the bottoms aligned this has to be considered as well.
63 Example:
65 output HDMI1 scale 2
67 output HDMI1 pos 0 1020 res 3200x1800
69 output eDP1 pos 1600 0 res 1920x1080
71 Note that the left x-pos of eDP1 is 1600 = 3200/2 and the bottom y-
73 pos is 1020 + (1800 / 2) = 1920 = 0 + 1920
74 output <name> scale <factor>
76 Scales the specified output by the specified scale factor. An inte‐
77 ger is recommended, but fractional values are also supported. If a
78 fractional value are specified, be warned that it is not possible
79 to faithfully represent the contents of your windows - they will be
80 rendered at the next highest integer scale factor and downscaled.
81 You may be better served by setting an integer scale factor and ad‐
82 justing the font size of your applications to taste. HiDPI isn't
83 supported with Xwayland clients (windows will blur).
84 output <name> scale_filter linear|nearest|smart
86 Indicates how to scale application buffers that are rendered at a
87 scale lower than the output's configured scale, such as lo-dpi ap‐
88 plications on hi-dpi screens. Linear is smoother and blurrier,
89 nearest (also known as nearest neighbor) is sharper and blockier.
90 Setting "smart" will apply nearest scaling when the output has an
91 integer scale factor, otherwise linear. The default is "smart".
92 output <name> subpixel rgb|bgr|vrgb|vbgr|none
94 Manually sets the subpixel hinting for the specified output. This
95 value is usually auto-detected, but some displays may misreport
96 their subpixel geometry. Using the correct subpixel hinting allows
97 for sharper text. Incorrect values will result in blurrier text.
98 When changing this via swaymsg, some applications may need to be
99 restarted to use the new value.
100 output <name> background|bg <file> <mode> [<fallback_color>]
102 Sets the wallpaper for the given output to the specified file, us‐
103 ing the given scaling mode (one of "stretch", "fill", "fit", "cen‐
104 ter", "tile"). If the specified file cannot be accessed or if the
105 image does not fill the entire output, a fallback color may be pro‐
106 vided to cover the rest of the output. fallback_color should be
107 specified as #RRGGBB. Alpha is not supported.
108 output <name> background|bg <color> solid_color
110 Sets the background of the given output to the specified color.
111 color should be specified as #RRGGBB. Alpha is not supported.
112 output <name> transform <transform> [clockwise|anticlockwise]
114 Sets the background transform to the given value. Can be one of
115 "90", "180", "270" for rotation; or "flipped", "flipped-90",
116 "flipped-180", "flipped-270" to apply a rotation and flip, or "nor‐
117 mal" to apply no transform. The rotation is performed clockwise. If
118 a single output is chosen and a rotation direction is specified
119 (clockwise or anticlockwise) then the transform is added or sub‐
120 tracted from the current transform (this cannot be used directly in
121 the configuration file).
122 output <name> disable|enable
124 Enables or disables the specified output (all outputs are enabled
125 by default).
126 As opposed to the power command, the output will lose its current
128 workspace and windows.
129 output <name> toggle
131 Toggle the specified output.
132 output <name> power on|off|toggle
134 Turns on or off the specified output.
135 As opposed to the enable and disable commands, the output keeps its
137 current workspaces and windows.
138 output <name> dpms on|off|toggle
140 Deprecated. Alias for power.
141 output <name> max_render_time off|<msec>
143 Controls when sway composites the output, as a positive number of
144 milliseconds before the next display refresh. A smaller number
145 leads to fresher composited frames and lower perceived input la‐
146 tency, but if set too low, sway may not finish compositing in time
147 for display refresh, leading to delayed frames.
148 When set to off, sway composites immediately after display refresh,
150 maximizing time available for compositing.
151 To adjust when applications are instructed to render, see max_ren‐
153 der_time in sway(5).
154 To set this up for optimal latency:
156 1. Launch some full-screen application that renders continuously,
157 like glxgears.
158 2. Start with max_render_time 1. Increment by 1 if you see frame
159 drops.
160 This setting only has an effect on Wayland and DRM backends, as
163 support for presentation timestamps and predicted output refresh
164 rate is required.
165 output <name> adaptive_sync on|off
167 Enables or disables adaptive synchronization (often referred to as
168 Variable Refresh Rate, or by the vendor-specific names FreeSync/G-
169 Sync).
170 Adaptive sync allows clients to submit frames a little too late
172 without having to wait a whole refresh period to display it on
173 screen. Enabling adaptive sync can improve latency, but can cause
174 flickering on some hardware.
175 output <name> render_bit_depth 8|10
177 Controls the color channel bit depth at which frames are rendered;
178 the default is currently 8 bits per channel.
179 Setting higher values will not have an effect if hardware and soft‐
181 ware lack support for such bit depths. Successfully increasing the
182 render bit depth will not necessarily increase the bit depth of the
183 frames sent to a display. An increased render bit depth may provide
184 smoother rendering of gradients, and screenshots which can more
185 precisely store the colors of programs which display high bit depth
186 colors.
187 Warnings: this can break screenshot/screencast programs which have
189 not been updated to work with different bit depths. This command is
190 experimental, and may be removed or changed in the future.
191
193 sway(5) sway-input(5)
194 2023-02-12 sway-output(5)