1sane-tamarack(5)         SANE Scanner Access Now Easy         sane-tamarack(5)
2
3
4

NAME

6       sane-tamarack - SANE backend for Tamarack flatbed scanners
7

DESCRIPTION

9       The  sane-tamarack  library implements a SANE (Scanner Access Now Easy)
10       backend that provides access to the following  Tamarack  flatbed  scan‐
11       ners:
12
13              Artiscan 6000C
14              Artiscan 8000C
15              Artiscan 12000C
16

DEVICE NAMES

18       This backend expects device names of the form:
19
20              special
21
22       Where  special is the path-name for the special device that corresponds
23       to a SCSI scanner. The special device  name  must  be  a  generic  SCSI
24       device or a symlink to such a device.  The program sane-find-scanner(1)
25       helps to find out the correct device. Under Linux, such a  device  name
26       could  be  /dev/sga  or  /dev/sge,  for  example.  See sane-scsi(5) for
27       details.
28
29

FILES

31       /etc/sane.d/tamarack.conf
32              The  backend  configuration  file  (see  also   description   of
33              SANE_CONFIG_DIR below).
34
35       /usr/lib64/sane/libsane-tamarack.a
36              The static library implementing this backend.
37
38       /usr/lib64/sane/libsane-tamarack.so
39              The shared library implementing this backend (present on systems
40              that support dynamic loading).
41

ENVIRONMENT

43       SANE_CONFIG_DIR
44              This environment variable specifies the list of directories that
45              may contain the configuration file.  Under UNIX, the directories
46              are separated by a colon (`:'), under OS/2, they  are  separated
47              by a semi-colon (`;').  If this variable is not set, the config‐
48              uration file is searched in two default directories: first,  the
49              current working directory (".") and then in /etc/sane.d.  If the
50              value of the environment variable ends with the directory  sepa‐
51              rator character, then the default directories are searched after
52              the explicitly  specified  directories.   For  example,  setting
53              SANE_CONFIG_DIR  to  "/tmp/config:"  would result in directories
54              tmp/config, ., and /etc/sane.d being searched (in this order).
55
56       SANE_DEBUG_TAMARACK
57              If the library was compiled with  debug  support  enabled,  this
58              environment  variable controls the debug level for this backend.
59              Higher debug levels increase the verbosity of the output.
60
61              Example: export SANE_DEBUG_TAMARACK=4
62
63

SEE ALSO

65       sane(7), sane-find-scanner(1), sane-scsi(5)
66
67

AUTHOR

69       Roger Wolff
70
71
72
73                                  14 Jul 2008                 sane-tamarack(5)
Impressum