1sane-tamarack(5)         SANE Scanner Access Now Easy         sane-tamarack(5)
2
3
4

NAME

6       sane-tamarack - SANE backend for Tamarack flatbed scanners
7

DESCRIPTION

9       The  sane-tamarack  library implements a SANE (Scanner Access Now Easy)
10       backend that provides access to the following  Tamarack  flatbed  scan‐
11       ners:
12
13              Artiscan 6000C
14              Artiscan 8000C
15              Artiscan 12000C
16

DEVICE NAMES

18       This backend expects device names of the form:
19
20              special
21
22       Where  special is the path-name for the special device that corresponds
23       to a SCSI scanner. The special device name must be a generic  SCSI  de‐
24       vice  or  a symlink to such a device.  The program sane-find-scanner(1)
25       helps to find out the correct device. Under Linux, such a  device  name
26       could  be  /dev/sga or /dev/sge, for example.  See sane-scsi(5) for de‐
27       tails.
28
29

FILES

31       /etc/sane.d/tamarack.conf
32              The  backend  configuration  file  (see  also   description   of
33              SANE_CONFIG_DIR below).
34
35       /usr/lib64/sane/libsane-tamarack.a
36              The static library implementing this backend.
37
38       /usr/lib64/sane/libsane-tamarack.so
39              The shared library implementing this backend (present on systems
40              that support dynamic loading).
41

ENVIRONMENT

43       SANE_CONFIG_DIR
44              This environment variable specifies the list of directories that
45              may contain the configuration file.  On *NIX systems, the direc‐
46              tories are separated by a colon (`:'), under OS/2, they are sep‐
47              arated  by a semi-colon (`;').  If this variable is not set, the
48              configuration file  is  searched  in  two  default  directories:
49              first,   the   current  working  directory  (".")  and  then  in
50              /etc/sane.d.  If the value of the environment variable ends with
51              the  directory separator character, then the default directories
52              are searched after the explicitly  specified  directories.   For
53              example,  setting SANE_CONFIG_DIR to "/tmp/config:" would result
54              in directories tmp/config, ., and /etc/sane.d being searched (in
55              this order).
56
57       SANE_DEBUG_TAMARACK
58              If the library was compiled with debug support enabled, this en‐
59              vironment variable controls the debug level  for  this  backend.
60              Higher debug levels increase the verbosity of the output.
61
62              Example: export SANE_DEBUG_TAMARACK=4
63
64

SEE ALSO

66       sane(7), sane-find-scanner(1), sane-scsi(5)
67
68

AUTHOR

70       Roger Wolff
71
72
73
74                                  14 Jul 2008                 sane-tamarack(5)