1pkcs11proxyd_selinux(8) SELinux Policy pkcs11proxyd pkcs11proxyd_selinux(8)
2
6 pkcs11proxyd_selinux - Security Enhanced Linux Policy for the
7 pkcs11proxyd processes
8
10 Security-Enhanced Linux secures the pkcs11proxyd processes via flexible
11 mandatory access control.
12 The pkcs11proxyd processes execute with the pkcs11proxyd_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep pkcs11proxyd_t
20
24 The pkcs11proxyd_t SELinux type can be entered via the
25 pkcs11proxyd_exec_t file type.
26 The default entrypoint paths for the pkcs11proxyd_t domain are the fol‐
28 lowing:
29 /usr/sbin/pkcs11proxyd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 pkcs11proxyd policy is very flexible allowing users to setup their
40 pkcs11proxyd processes in as secure a method as possible.
41 The following process types are defined for pkcs11proxyd:
43 pkcs11proxyd_t
45 Note: semanage permissive -a pkcs11proxyd_t can be used to make the
47 process type pkcs11proxyd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 pkcs11proxyd policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run pkcs11proxyd with the tight‐
56 est access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type pkcs11proxyd_t can manage files labeled with
76 the following file types. The paths listed are the default paths for
77 these file types. Note the processes UID still need to have DAC per‐
78 missions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/pcsd-ruby.socket
103 /var/run/corosync-qnetd(/.*)?
104 /var/run/corosync-qdevice(/.*)?
105 /var/run/corosync.pid
106 /var/run/cpglockd.pid
107 /var/run/rgmanager.pid
108 /var/run/cluster/rgmanager.sk
109 krb5_host_rcache_t
111 /var/tmp/krb5_0.rcache2
113 /var/cache/krb5rcache(/.*)?
114 /var/tmp/nfs_0
115 /var/tmp/DNS_25
116 /var/tmp/host_0
117 /var/tmp/imap_0
118 /var/tmp/HTTP_23
119 /var/tmp/HTTP_48
120 /var/tmp/ldap_55
121 /var/tmp/ldap_487
122 /var/tmp/ldapmap1_0
123 pkcs11proxyd_var_lib_t
125 /var/lib/pkcs11proxyd(/.*)?
127 root_t
129 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
131 /
132 /initrd
133
136 SELinux requires files to have an extended attribute to define the file
137 type.
138 You can see the context of a file using the -Z option to ls
140 Policy governs the access confined processes have to these files.
142 SELinux pkcs11proxyd policy is very flexible allowing users to setup
143 their pkcs11proxyd processes in as secure a method as possible.
144 STANDARD FILE CONTEXT
146 SELinux defines the file context types for the pkcs11proxyd, if you
148 wanted to store files with these types in a diffent paths, you need to
149 execute the semanage command to specify alternate labeling and then use
150 restorecon to put the labels on disk.
151 semanage fcontext -a -t pkcs11proxyd_var_run_t '/srv/myp‐
153 kcs11proxyd_content(/.*)?'
154 restorecon -R -v /srv/mypkcs11proxyd_content
155 Note: SELinux often uses regular expressions to specify labels that
157 match multiple files.
158 The following file types are defined for pkcs11proxyd:
160 pkcs11proxyd_exec_t
164 - Set files with the pkcs11proxyd_exec_t type, if you want to transi‐
166 tion an executable to the pkcs11proxyd_t domain.
167 pkcs11proxyd_unit_file_t
171 - Set files with the pkcs11proxyd_unit_file_t type, if you want to
173 treat the files as pkcs11proxyd unit content.
174 pkcs11proxyd_var_lib_t
178 - Set files with the pkcs11proxyd_var_lib_t type, if you want to store
180 the pkcs11proxyd files under the /var/lib directory.
181 pkcs11proxyd_var_run_t
185 - Set files with the pkcs11proxyd_var_run_t type, if you want to store
187 the pkcs11proxyd files under the /run or /var/run directory.
188 Note: File context can be temporarily modified with the chcon command.
192 If you want to permanently change the file context you need to use the
193 semanage fcontext command. This will modify the SELinux labeling data‐
194 base. You will need to use restorecon to apply the labels.
195
198 semanage fcontext can also be used to manipulate default file context
199 mappings.
200 semanage permissive can also be used to manipulate whether or not a
202 process type is permissive.
203 semanage module can also be used to enable/disable/install/remove pol‐
205 icy modules.
206 semanage boolean can also be used to manipulate the booleans
208 system-config-selinux is a GUI tool available to customize SELinux pol‐
211 icy settings.
212
215 This manual page was auto-generated using sepolicy manpage .
216
219 selinux(8), pkcs11proxyd(8), semanage(8), restorecon(8), chcon(1), se‐
220 policy(8), setsebool(8)
221pkcs11proxyd 21-11-19 pkcs11proxyd_selinux(8)