1pkcs11proxyd_selinux(8) SELinux Policy pkcs11proxyd pkcs11proxyd_selinux(8)
2
6 pkcs11proxyd_selinux - Security Enhanced Linux Policy for the
7 pkcs11proxyd processes
8
10 Security-Enhanced Linux secures the pkcs11proxyd processes via flexible
11 mandatory access control.
12 The pkcs11proxyd processes execute with the pkcs11proxyd_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep pkcs11proxyd_t
20
24 The pkcs11proxyd_t SELinux type can be entered via the
25 pkcs11proxyd_exec_t file type.
26 The default entrypoint paths for the pkcs11proxyd_t domain are the fol‐
28 lowing:
29 /usr/sbin/pkcs11proxyd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 pkcs11proxyd policy is very flexible allowing users to setup their
40 pkcs11proxyd processes in as secure a method as possible.
41 The following process types are defined for pkcs11proxyd:
43 pkcs11proxyd_t
45 Note: semanage permissive -a pkcs11proxyd_t can be used to make the
47 process type pkcs11proxyd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 pkcs11proxyd policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run pkcs11proxyd with the tight‐
56 est access possible.
57 If you want to dontaudit all daemons scheduling requests (setsched,
61 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
62 Enabled by default.
63 setsebool -P daemons_dontaudit_scheduling 1
65 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70 setsebool -P fips_mode 1
72 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77 setsebool -P nis_enabled 1
79
83 The SELinux process type pkcs11proxyd_t can manage files labeled with
84 the following file types. The paths listed are the default paths for
85 these file types. Note the processes UID still need to have DAC per‐
86 missions.
87 cluster_conf_t
89 /etc/cluster(/.*)?
91 cluster_var_lib_t
93 /var/lib/pcsd(/.*)?
95 /var/lib/cluster(/.*)?
96 /var/lib/openais(/.*)?
97 /var/lib/pengine(/.*)?
98 /var/lib/corosync(/.*)?
99 /usr/lib/heartbeat(/.*)?
100 /var/lib/heartbeat(/.*)?
101 /var/lib/pacemaker(/.*)?
102 cluster_var_run_t
104 /var/run/crm(/.*)?
106 /var/run/cman_.*
107 /var/run/rsctmp(/.*)?
108 /var/run/aisexec.*
109 /var/run/heartbeat(/.*)?
110 /var/run/pcsd-ruby.socket
111 /var/run/corosync-qnetd(/.*)?
112 /var/run/corosync-qdevice(/.*)?
113 /var/run/corosync.pid
114 /var/run/cpglockd.pid
115 /var/run/rgmanager.pid
116 /var/run/cluster/rgmanager.sk
117 krb5_host_rcache_t
119 /var/tmp/krb5_0.rcache2
121 /var/cache/krb5rcache(/.*)?
122 /var/tmp/nfs_0
123 /var/tmp/DNS_25
124 /var/tmp/host_0
125 /var/tmp/imap_0
126 /var/tmp/HTTP_23
127 /var/tmp/HTTP_48
128 /var/tmp/ldap_55
129 /var/tmp/ldap_487
130 /var/tmp/ldapmap1_0
131 pkcs11proxyd_var_lib_t
133 /var/lib/pkcs11proxyd(/.*)?
135 root_t
137 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
139 /
140 /initrd
141
144 SELinux requires files to have an extended attribute to define the file
145 type.
146 You can see the context of a file using the -Z option to ls
148 Policy governs the access confined processes have to these files.
150 SELinux pkcs11proxyd policy is very flexible allowing users to setup
151 their pkcs11proxyd processes in as secure a method as possible.
152 STANDARD FILE CONTEXT
154 SELinux defines the file context types for the pkcs11proxyd, if you
156 wanted to store files with these types in a different paths, you need
157 to execute the semanage command to specify alternate labeling and then
158 use restorecon to put the labels on disk.
159 semanage fcontext -a -t pkcs11proxyd_exec_t '/srv/pkcs11proxyd/con‐
161 tent(/.*)?'
162 restorecon -R -v /srv/mypkcs11proxyd_content
163 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166 The following file types are defined for pkcs11proxyd:
168 pkcs11proxyd_exec_t
172 - Set files with the pkcs11proxyd_exec_t type, if you want to transi‐
174 tion an executable to the pkcs11proxyd_t domain.
175 pkcs11proxyd_unit_file_t
179 - Set files with the pkcs11proxyd_unit_file_t type, if you want to
181 treat the files as pkcs11proxyd unit content.
182 pkcs11proxyd_var_lib_t
186 - Set files with the pkcs11proxyd_var_lib_t type, if you want to store
188 the pkcs11proxyd files under the /var/lib directory.
189 pkcs11proxyd_var_run_t
193 - Set files with the pkcs11proxyd_var_run_t type, if you want to store
195 the pkcs11proxyd files under the /run or /var/run directory.
196 Note: File context can be temporarily modified with the chcon command.
200 If you want to permanently change the file context you need to use the
201 semanage fcontext command. This will modify the SELinux labeling data‐
202 base. You will need to use restorecon to apply the labels.
203
206 semanage fcontext can also be used to manipulate default file context
207 mappings.
208 semanage permissive can also be used to manipulate whether or not a
210 process type is permissive.
211 semanage module can also be used to enable/disable/install/remove pol‐
213 icy modules.
214 semanage boolean can also be used to manipulate the booleans
216 system-config-selinux is a GUI tool available to customize SELinux pol‐
219 icy settings.
220
223 This manual page was auto-generated using sepolicy manpage .
224
227 selinux(8), pkcs11proxyd(8), semanage(8), restorecon(8), chcon(1), se‐
228 policy(8), setsebool(8)
229pkcs11proxyd 23-12-15 pkcs11proxyd_selinux(8)