1hypervvssd_selinux(8) SELinux Policy hypervvssd hypervvssd_selinux(8)
2
3
4
6 hypervvssd_selinux - Security Enhanced Linux Policy for the hypervvssd
7 processes
8
10 Security-Enhanced Linux secures the hypervvssd processes via flexible
11 mandatory access control.
12
13 The hypervvssd processes execute with the hypervvssd_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep hypervvssd_t
20
21
22
24 The hypervvssd_t SELinux type can be entered via the hypervvssd_exec_t
25 file type.
26
27 The default entrypoint paths for the hypervvssd_t domain are the fol‐
28 lowing:
29
30 /usr/sbin/hypervvssd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 hypervvssd policy is very flexible allowing users to setup their hyper‐
40 vvssd processes in as secure a method as possible.
41
42 The following process types are defined for hypervvssd:
43
44 hypervvssd_t
45
46 Note: semanage permissive -a hypervvssd_t can be used to make the
47 process type hypervvssd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
51
53 SELinux policy is customizable based on least access required. hyper‐
54 vvssd policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run hypervvssd with the tightest ac‐
56 cess possible.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
68 The SELinux process type hypervvssd_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71
72 cluster_conf_t
73
74 /etc/cluster(/.*)?
75
76 cluster_var_lib_t
77
78 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86
87 cluster_var_run_t
88
89 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/pcsd-ruby.socket
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101
102 root_t
103
104 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
105 /
106 /initrd
107
108
110 SELinux requires files to have an extended attribute to define the file
111 type.
112
113 You can see the context of a file using the -Z option to ls
114
115 Policy governs the access confined processes have to these files.
116 SELinux hypervvssd policy is very flexible allowing users to setup
117 their hypervvssd processes in as secure a method as possible.
118
119 STANDARD FILE CONTEXT
120
121 SELinux defines the file context types for the hypervvssd, if you
122 wanted to store files with these types in a diffent paths, you need to
123 execute the semanage command to specify alternate labeling and then use
124 restorecon to put the labels on disk.
125
126 semanage fcontext -a -t hypervvssd_unit_file_t '/srv/myhypervvssd_con‐
127 tent(/.*)?'
128 restorecon -R -v /srv/myhypervvssd_content
129
130 Note: SELinux often uses regular expressions to specify labels that
131 match multiple files.
132
133 The following file types are defined for hypervvssd:
134
135
136
137 hypervvssd_exec_t
138
139 - Set files with the hypervvssd_exec_t type, if you want to transition
140 an executable to the hypervvssd_t domain.
141
142
143
144 hypervvssd_unit_file_t
145
146 - Set files with the hypervvssd_unit_file_t type, if you want to treat
147 the files as hypervvssd unit content.
148
149
150
151 Note: File context can be temporarily modified with the chcon command.
152 If you want to permanently change the file context you need to use the
153 semanage fcontext command. This will modify the SELinux labeling data‐
154 base. You will need to use restorecon to apply the labels.
155
156
158 semanage fcontext can also be used to manipulate default file context
159 mappings.
160
161 semanage permissive can also be used to manipulate whether or not a
162 process type is permissive.
163
164 semanage module can also be used to enable/disable/install/remove pol‐
165 icy modules.
166
167 semanage boolean can also be used to manipulate the booleans
168
169
170 system-config-selinux is a GUI tool available to customize SELinux pol‐
171 icy settings.
172
173
175 This manual page was auto-generated using sepolicy manpage .
176
177
179 selinux(8), hypervvssd(8), semanage(8), restorecon(8), chcon(1), sepol‐
180 icy(8), setsebool(8)
181
182
183
184hypervvssd 21-11-19 hypervvssd_selinux(8)