1openfortivpn_selinux(8) SELinux Policy openfortivpn openfortivpn_selinux(8)
2
3
4
6 openfortivpn_selinux - Security Enhanced Linux Policy for the open‐
7 fortivpn processes
8
10 Security-Enhanced Linux secures the openfortivpn processes via flexible
11 mandatory access control.
12
13 The openfortivpn processes execute with the openfortivpn_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep openfortivpn_t
20
21
22
24 The openfortivpn_t SELinux type can be entered via the open‐
25 fortivpn_exec_t file type.
26
27 The default entrypoint paths for the openfortivpn_t domain are the fol‐
28 lowing:
29
30 /usr/libexec/nm-fortisslvpn-.*, /usr/bin/openfortivpn
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 openfortivpn policy is very flexible allowing users to setup their
40 openfortivpn processes in as secure a method as possible.
41
42 The following process types are defined for openfortivpn:
43
44 openfortivpn_t
45
46 Note: semanage permissive -a openfortivpn_t can be used to make the
47 process type openfortivpn_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
51
53 SELinux policy is customizable based on least access required. open‐
54 fortivpn policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run openfortivpn with the tightest
56 access possible.
57
58
59
60 If you want to determine whether openfortivpn can connect to the TCP
61 network, you must turn on the openfortivpn_can_network_connect boolean.
62 Enabled by default.
63
64 setsebool -P openfortivpn_can_network_connect 1
65
66
67
68 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70
71 setsebool -P fips_mode 1
72
73
74
75 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77
78 setsebool -P nis_enabled 1
79
80
81
83 The SELinux process type openfortivpn_t can manage files labeled with
84 the following file types. The paths listed are the default paths for
85 these file types. Note the processes UID still need to have DAC per‐
86 missions.
87
88 cluster_conf_t
89
90 /etc/cluster(/.*)?
91
92 cluster_var_lib_t
93
94 /var/lib/pcsd(/.*)?
95 /var/lib/cluster(/.*)?
96 /var/lib/openais(/.*)?
97 /var/lib/pengine(/.*)?
98 /var/lib/corosync(/.*)?
99 /usr/lib/heartbeat(/.*)?
100 /var/lib/heartbeat(/.*)?
101 /var/lib/pacemaker(/.*)?
102
103 cluster_var_run_t
104
105 /var/run/crm(/.*)?
106 /var/run/cman_.*
107 /var/run/rsctmp(/.*)?
108 /var/run/aisexec.*
109 /var/run/heartbeat(/.*)?
110 /var/run/pcsd-ruby.socket
111 /var/run/corosync-qnetd(/.*)?
112 /var/run/corosync-qdevice(/.*)?
113 /var/run/corosync.pid
114 /var/run/cpglockd.pid
115 /var/run/rgmanager.pid
116 /var/run/cluster/rgmanager.sk
117
118 krb5_host_rcache_t
119
120 /var/tmp/krb5_0.rcache2
121 /var/cache/krb5rcache(/.*)?
122 /var/tmp/nfs_0
123 /var/tmp/DNS_25
124 /var/tmp/host_0
125 /var/tmp/imap_0
126 /var/tmp/HTTP_23
127 /var/tmp/HTTP_48
128 /var/tmp/ldap_55
129 /var/tmp/ldap_487
130 /var/tmp/ldapmap1_0
131
132 openfortivpn_var_lib_t
133
134 /var/lib/NetworkManager-fortisslvpn(/.*)?
135
136 root_t
137
138 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
139 /
140 /initrd
141
142
144 SELinux requires files to have an extended attribute to define the file
145 type.
146
147 You can see the context of a file using the -Z option to ls
148
149 Policy governs the access confined processes have to these files.
150 SELinux openfortivpn policy is very flexible allowing users to setup
151 their openfortivpn processes in as secure a method as possible.
152
153 STANDARD FILE CONTEXT
154
155 SELinux defines the file context types for the openfortivpn, if you
156 wanted to store files with these types in a diffent paths, you need to
157 execute the semanage command to specify alternate labeling and then use
158 restorecon to put the labels on disk.
159
160 semanage fcontext -a -t openfortivpn_var_lib_t '/srv/myopen‐
161 fortivpn_content(/.*)?'
162 restorecon -R -v /srv/myopenfortivpn_content
163
164 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166
167 The following file types are defined for openfortivpn:
168
169
170
171 openfortivpn_exec_t
172
173 - Set files with the openfortivpn_exec_t type, if you want to transi‐
174 tion an executable to the openfortivpn_t domain.
175
176
177 Paths:
178 /usr/libexec/nm-fortisslvpn-.*, /usr/bin/openfortivpn
179
180
181 openfortivpn_var_lib_t
182
183 - Set files with the openfortivpn_var_lib_t type, if you want to store
184 the openfortivpn files under the /var/lib directory.
185
186
187
188 Note: File context can be temporarily modified with the chcon command.
189 If you want to permanently change the file context you need to use the
190 semanage fcontext command. This will modify the SELinux labeling data‐
191 base. You will need to use restorecon to apply the labels.
192
193
195 semanage fcontext can also be used to manipulate default file context
196 mappings.
197
198 semanage permissive can also be used to manipulate whether or not a
199 process type is permissive.
200
201 semanage module can also be used to enable/disable/install/remove pol‐
202 icy modules.
203
204 semanage boolean can also be used to manipulate the booleans
205
206
207 system-config-selinux is a GUI tool available to customize SELinux pol‐
208 icy settings.
209
210
212 This manual page was auto-generated using sepolicy manpage .
213
214
216 selinux(8), openfortivpn(8), semanage(8), restorecon(8), chcon(1), se‐
217 policy(8), setsebool(8)
218
219
220
221openfortivpn 22-05-27 openfortivpn_selinux(8)