1openfortivpn_selinux(8) SELinux Policy openfortivpn openfortivpn_selinux(8)
2
6 openfortivpn_selinux - Security Enhanced Linux Policy for the open‐
7 fortivpn processes
8
10 Security-Enhanced Linux secures the openfortivpn processes via flexible
11 mandatory access control.
12 The openfortivpn processes execute with the openfortivpn_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep openfortivpn_t
20
24 The openfortivpn_t SELinux type can be entered via the open‐
25 fortivpn_exec_t file type.
26 The default entrypoint paths for the openfortivpn_t domain are the fol‐
28 lowing:
29 /usr/libexec/nm-fortisslvpn-.*, /usr/bin/openfortivpn
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 openfortivpn policy is very flexible allowing users to setup their
40 openfortivpn processes in as secure a method as possible.
41 The following process types are defined for openfortivpn:
43 openfortivpn_t
45 Note: semanage permissive -a openfortivpn_t can be used to make the
47 process type openfortivpn_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. open‐
54 fortivpn policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run openfortivpn with the tightest
56 access possible.
57 If you want to determine whether openfortivpn can connect to the TCP
61 network, you must turn on the openfortivpn_can_network_connect boolean.
62 Enabled by default.
63 setsebool -P openfortivpn_can_network_connect 1
65 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70 setsebool -P fips_mode 1
72 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77 setsebool -P nis_enabled 1
79
83 The SELinux process type openfortivpn_t can manage files labeled with
84 the following file types. The paths listed are the default paths for
85 these file types. Note the processes UID still need to have DAC per‐
86 missions.
87 cluster_conf_t
89 /etc/cluster(/.*)?
91 cluster_var_lib_t
93 /var/lib/pcsd(/.*)?
95 /var/lib/cluster(/.*)?
96 /var/lib/openais(/.*)?
97 /var/lib/pengine(/.*)?
98 /var/lib/corosync(/.*)?
99 /usr/lib/heartbeat(/.*)?
100 /var/lib/heartbeat(/.*)?
101 /var/lib/pacemaker(/.*)?
102 cluster_var_run_t
104 /var/run/crm(/.*)?
106 /var/run/cman_.*
107 /var/run/rsctmp(/.*)?
108 /var/run/aisexec.*
109 /var/run/heartbeat(/.*)?
110 /var/run/pcsd-ruby.socket
111 /var/run/corosync-qnetd(/.*)?
112 /var/run/corosync-qdevice(/.*)?
113 /var/run/corosync.pid
114 /var/run/cpglockd.pid
115 /var/run/rgmanager.pid
116 /var/run/cluster/rgmanager.sk
117 krb5_host_rcache_t
119 /var/tmp/krb5_0.rcache2
121 /var/cache/krb5rcache(/.*)?
122 /var/tmp/nfs_0
123 /var/tmp/DNS_25
124 /var/tmp/host_0
125 /var/tmp/imap_0
126 /var/tmp/HTTP_23
127 /var/tmp/HTTP_48
128 /var/tmp/ldap_55
129 /var/tmp/ldap_487
130 /var/tmp/ldapmap1_0
131 openfortivpn_var_lib_t
133 /var/lib/NetworkManager-fortisslvpn(/.*)?
135 root_t
137 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
139 /
140 /initrd
141
144 SELinux requires files to have an extended attribute to define the file
145 type.
146 You can see the context of a file using the -Z option to ls
148 Policy governs the access confined processes have to these files.
150 SELinux openfortivpn policy is very flexible allowing users to setup
151 their openfortivpn processes in as secure a method as possible.
152 STANDARD FILE CONTEXT
154 SELinux defines the file context types for the openfortivpn, if you
156 wanted to store files with these types in a diffent paths, you need to
157 execute the semanage command to specify alternate labeling and then use
158 restorecon to put the labels on disk.
159 semanage fcontext -a -t openfortivpn_var_lib_t '/srv/myopen‐
161 fortivpn_content(/.*)?'
162 restorecon -R -v /srv/myopenfortivpn_content
163 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166 The following file types are defined for openfortivpn:
168 openfortivpn_exec_t
172 - Set files with the openfortivpn_exec_t type, if you want to transi‐
174 tion an executable to the openfortivpn_t domain.
175 Paths:
178 /usr/libexec/nm-fortisslvpn-.*, /usr/bin/openfortivpn
179 openfortivpn_var_lib_t
182 - Set files with the openfortivpn_var_lib_t type, if you want to store
184 the openfortivpn files under the /var/lib directory.
185 Note: File context can be temporarily modified with the chcon command.
189 If you want to permanently change the file context you need to use the
190 semanage fcontext command. This will modify the SELinux labeling data‐
191 base. You will need to use restorecon to apply the labels.
192
195 semanage fcontext can also be used to manipulate default file context
196 mappings.
197 semanage permissive can also be used to manipulate whether or not a
199 process type is permissive.
200 semanage module can also be used to enable/disable/install/remove pol‐
202 icy modules.
203 semanage boolean can also be used to manipulate the booleans
205 system-config-selinux is a GUI tool available to customize SELinux pol‐
208 icy settings.
209
212 This manual page was auto-generated using sepolicy manpage .
213
216 selinux(8), openfortivpn(8), semanage(8), restorecon(8), chcon(1), se‐
217 policy(8), setsebool(8)
218openfortivpn 22-05-27 openfortivpn_selinux(8)