1pki_ra_selinux(8) SELinux Policy pki_ra pki_ra_selinux(8)
2
6 pki_ra_selinux - Security Enhanced Linux Policy for the pki_ra pro‐
7 cesses
8
10 Security-Enhanced Linux secures the pki_ra processes via flexible
11 mandatory access control.
12 The pki_ra processes execute with the pki_ra_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep pki_ra_t
20
24 The pki_ra_t SELinux type can be entered via the pki_ra_exec_t file
25 type.
26 The default entrypoint paths for the pki_ra_t domain are the following:
28 /var/lib/pki-ra/pki-ra
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 pki_ra policy is very flexible allowing users to setup their pki_ra
39 processes in as secure a method as possible.
40 The following process types are defined for pki_ra:
42 pki_ra_t
44 Note: semanage permissive -a pki_ra_t can be used to make the process
46 type pki_ra_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. pki_ra
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run pki_ra with the tightest access possible.
55 If you want to allow all domains to execute in fips_mode, you must turn
59 on the fips_mode boolean. Enabled by default.
60 setsebool -P fips_mode 1
62
66 SELinux defines port types to represent TCP and UDP ports.
67 You can see the types associated with a port by using the following
69 command:
70 semanage port -l
72 Policy governs the access confined processes have to these ports.
75 SELinux pki_ra policy is very flexible allowing users to setup their
76 pki_ra processes in as secure a method as possible.
77 The following port types are defined for pki_ra:
79 pki_ra_port_t
82 Default Defined Ports:
86 tcp 12888-12889
87
89 The SELinux process type pki_ra_t can manage files labeled with the
90 following file types. The paths listed are the default paths for these
91 file types. Note the processes UID still need to have DAC permissions.
92 cluster_conf_t
94 /etc/cluster(/.*)?
96 cluster_var_lib_t
98 /var/lib/pcsd(/.*)?
100 /var/lib/cluster(/.*)?
101 /var/lib/openais(/.*)?
102 /var/lib/pengine(/.*)?
103 /var/lib/corosync(/.*)?
104 /usr/lib/heartbeat(/.*)?
105 /var/lib/heartbeat(/.*)?
106 /var/lib/pacemaker(/.*)?
107 cluster_var_run_t
109 /var/run/crm(/.*)?
111 /var/run/cman_.*
112 /var/run/rsctmp(/.*)?
113 /var/run/aisexec.*
114 /var/run/heartbeat(/.*)?
115 /var/run/pcsd-ruby.socket
116 /var/run/corosync-qnetd(/.*)?
117 /var/run/corosync-qdevice(/.*)?
118 /var/run/corosync.pid
119 /var/run/cpglockd.pid
120 /var/run/rgmanager.pid
121 /var/run/cluster/rgmanager.sk
122 krb5_host_rcache_t
124 /var/tmp/krb5_0.rcache2
126 /var/cache/krb5rcache(/.*)?
127 /var/tmp/nfs_0
128 /var/tmp/DNS_25
129 /var/tmp/host_0
130 /var/tmp/imap_0
131 /var/tmp/HTTP_23
132 /var/tmp/HTTP_48
133 /var/tmp/ldap_55
134 /var/tmp/ldap_487
135 /var/tmp/ldapmap1_0
136 mail_spool_t
138 /var/mail(/.*)?
140 /var/spool/imap(/.*)?
141 /var/spool/mail(/.*)?
142 /var/spool/smtpd(/.*)?
143 mqueue_spool_t
145 /var/spool/(client)?mqueue(/.*)?
147 /var/spool/mqueue.in(/.*)?
148 pki_common_t
150 /opt/nfast(/.*)?
152 pki_ra_etc_rw_t
154 /etc/pki-ra(/.*)?
156 /etc/sysconfig/pki/ra(/.*)?
157 pki_ra_lock_t
159 pki_ra_log_t
162 /var/log/pki-ra(/.*)?
164 pki_ra_tmp_t
166 pki_ra_var_lib_t
169 /var/lib/pki-ra(/.*)?
171 pki_ra_var_run_t
173 /var/run/pki/ra(/.*)?
175 root_t
177 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
179 /
180 /initrd
181
184 SELinux requires files to have an extended attribute to define the file
185 type.
186 You can see the context of a file using the -Z option to ls
188 Policy governs the access confined processes have to these files.
190 SELinux pki_ra policy is very flexible allowing users to setup their
191 pki_ra processes in as secure a method as possible.
192 EQUIVALENCE DIRECTORIES
194 pki_ra policy stores data with multiple different file context types
197 under the /var/lib/pki-ra directory. If you would like to store the
198 data in a different directory you can use the semanage command to cre‐
199 ate an equivalence mapping. If you wanted to store this data under the
200 /srv directory you would execute the following command:
201 semanage fcontext -a -e /var/lib/pki-ra /srv/pki-ra
203 restorecon -R -v /srv/pki-ra
204 STANDARD FILE CONTEXT
206 SELinux defines the file context types for the pki_ra, if you wanted to
208 store files with these types in a diffent paths, you need to execute
209 the semanage command to specify alternate labeling and then use re‐
210 storecon to put the labels on disk.
211 semanage fcontext -a -t pki_ra_tmp_t '/srv/mypki_ra_content(/.*)?'
213 restorecon -R -v /srv/mypki_ra_content
214 Note: SELinux often uses regular expressions to specify labels that
216 match multiple files.
217 The following file types are defined for pki_ra:
219 pki_ra_etc_rw_t
223 - Set files with the pki_ra_etc_rw_t type, if you want to treat the
225 files as pki ra etc read/write content.
226 Paths:
229 /etc/pki-ra(/.*)?, /etc/sysconfig/pki/ra(/.*)?
230 pki_ra_exec_t
233 - Set files with the pki_ra_exec_t type, if you want to transition an
235 executable to the pki_ra_t domain.
236 pki_ra_lock_t
240 - Set files with the pki_ra_lock_t type, if you want to treat the files
242 as pki ra lock data, stored under the /var/lock directory
243 pki_ra_log_t
247 - Set files with the pki_ra_log_t type, if you want to treat the data
249 as pki ra log data, usually stored under the /var/log directory.
250 pki_ra_script_exec_t
254 - Set files with the pki_ra_script_exec_t type, if you want to transi‐
256 tion an executable to the pki_ra_script_t domain.
257 pki_ra_tmp_t
261 - Set files with the pki_ra_tmp_t type, if you want to store pki ra
263 temporary files in the /tmp directories.
264 pki_ra_tomcat_exec_t
268 - Set files with the pki_ra_tomcat_exec_t type, if you want to transi‐
270 tion an executable to the pki_ra_tomcat_t domain.
271 pki_ra_var_lib_t
275 - Set files with the pki_ra_var_lib_t type, if you want to store the
277 pki ra files under the /var/lib directory.
278 pki_ra_var_run_t
282 - Set files with the pki_ra_var_run_t type, if you want to store the
284 pki ra files under the /run or /var/run directory.
285 Note: File context can be temporarily modified with the chcon command.
289 If you want to permanently change the file context you need to use the
290 semanage fcontext command. This will modify the SELinux labeling data‐
291 base. You will need to use restorecon to apply the labels.
292
295 semanage fcontext can also be used to manipulate default file context
296 mappings.
297 semanage permissive can also be used to manipulate whether or not a
299 process type is permissive.
300 semanage module can also be used to enable/disable/install/remove pol‐
302 icy modules.
303 semanage port can also be used to manipulate the port definitions
305 semanage boolean can also be used to manipulate the booleans
307 system-config-selinux is a GUI tool available to customize SELinux pol‐
310 icy settings.
311
314 This manual page was auto-generated using sepolicy manpage .
315
318 selinux(8), pki_ra(8), semanage(8), restorecon(8), chcon(1), sepol‐
319 icy(8), setsebool(8)
320pki_ra 22-05-27 pki_ra_selinux(8)