1accountsd_selinux(8)       SELinux Policy accountsd       accountsd_selinux(8)
2
3
4

NAME

6       accountsd_selinux  -  Security  Enhanced Linux Policy for the accountsd
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the accountsd  processes  via  flexible
11       mandatory access control.
12
13       The  accountsd processes execute with the accountsd_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep accountsd_t
20
21
22

ENTRYPOINTS

24       The  accountsd_t  SELinux  type can be entered via the accountsd_exec_t
25       file type.
26
27       The default entrypoint paths for the accountsd_t domain are the follow‐
28       ing:
29
30       /usr/libexec/accounts-daemon, /usr/lib/accountsservice/accounts-daemon
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       accountsd  policy  is  very  flexible allowing users to setup their ac‐
40       countsd processes in as secure a method as possible.
41
42       The following process types are defined for accountsd:
43
44       accountsd_t
45
46       Note: semanage permissive -a  accountsd_t  can  be  used  to  make  the
47       process  type  accountsd_t  permissive. SELinux does not deny access to
48       permissive process types, but the AVC (SELinux  denials)  messages  are
49       still generated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable  based on least access required.  ac‐
54       countsd policy is extremely flexible and has several booleans that  al‐
55       low  you  to  manipulate the policy and run accountsd with the tightest
56       access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type accountsd_t can manage files labeled with  the
76       following file types.  The paths listed are the default paths for these
77       file types.  Note the processes UID still need to have DAC permissions.
78
79       accountsd_var_lib_t
80
81            /var/lib/AccountsService(/.*)?
82
83       cluster_conf_t
84
85            /etc/cluster(/.*)?
86
87       cluster_var_lib_t
88
89            /var/lib/pcsd(/.*)?
90            /var/lib/cluster(/.*)?
91            /var/lib/openais(/.*)?
92            /var/lib/pengine(/.*)?
93            /var/lib/corosync(/.*)?
94            /usr/lib/heartbeat(/.*)?
95            /var/lib/heartbeat(/.*)?
96            /var/lib/pacemaker(/.*)?
97
98       cluster_var_run_t
99
100            /var/run/crm(/.*)?
101            /var/run/cman_.*
102            /var/run/rsctmp(/.*)?
103            /var/run/aisexec.*
104            /var/run/heartbeat(/.*)?
105            /var/run/pcsd-ruby.socket
106            /var/run/corosync-qnetd(/.*)?
107            /var/run/corosync-qdevice(/.*)?
108            /var/run/corosync.pid
109            /var/run/cpglockd.pid
110            /var/run/rgmanager.pid
111            /var/run/cluster/rgmanager.sk
112
113       krb5_host_rcache_t
114
115            /var/tmp/krb5_0.rcache2
116            /var/cache/krb5rcache(/.*)?
117            /var/tmp/nfs_0
118            /var/tmp/DNS_25
119            /var/tmp/host_0
120            /var/tmp/imap_0
121            /var/tmp/HTTP_23
122            /var/tmp/HTTP_48
123            /var/tmp/ldap_55
124            /var/tmp/ldap_487
125            /var/tmp/ldapmap1_0
126
127       root_t
128
129            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
130            /
131            /initrd
132
133       xdm_etc_t
134
135            /etc/[mg]dm(/.*)?
136
137

FILE CONTEXTS

139       SELinux requires files to have an extended attribute to define the file
140       type.
141
142       You can see the context of a file using the -Z option to ls
143
144       Policy  governs  the  access  confined  processes  have to these files.
145       SELinux accountsd policy is very flexible allowing users to setup their
146       accountsd processes in as secure a method as possible.
147
148       STANDARD FILE CONTEXT
149
150       SELinux defines the file context types for the accountsd, if you wanted
151       to store files with these types in a diffent paths, you need to execute
152       the  semanage  command  to  specify alternate labeling and then use re‐
153       storecon to put the labels on disk.
154
155       semanage fcontext -a  -t  accountsd_unit_file_t  '/srv/myaccountsd_con‐
156       tent(/.*)?'
157       restorecon -R -v /srv/myaccountsd_content
158
159       Note:  SELinux  often  uses  regular expressions to specify labels that
160       match multiple files.
161
162       The following file types are defined for accountsd:
163
164
165
166       accountsd_exec_t
167
168       - Set files with the accountsd_exec_t type, if you want  to  transition
169       an executable to the accountsd_t domain.
170
171
172       Paths:
173            /usr/libexec/accounts-daemon,   /usr/lib/accountsservice/accounts-
174            daemon
175
176
177       accountsd_unit_file_t
178
179       - Set files with the accountsd_unit_file_t type, if you want  to  treat
180       the files as accountsd unit content.
181
182
183
184       accountsd_var_lib_t
185
186       - Set files with the accountsd_var_lib_t type, if you want to store the
187       accountsd files under the /var/lib directory.
188
189
190
191       Note: File context can be temporarily modified with the chcon  command.
192       If  you want to permanently change the file context you need to use the
193       semanage fcontext command.  This will modify the SELinux labeling data‐
194       base.  You will need to use restorecon to apply the labels.
195
196

COMMANDS

198       semanage  fcontext  can also be used to manipulate default file context
199       mappings.
200
201       semanage permissive can also be used to manipulate  whether  or  not  a
202       process type is permissive.
203
204       semanage  module can also be used to enable/disable/install/remove pol‐
205       icy modules.
206
207       semanage boolean can also be used to manipulate the booleans
208
209
210       system-config-selinux is a GUI tool available to customize SELinux pol‐
211       icy settings.
212
213

AUTHOR

215       This manual page was auto-generated using sepolicy manpage .
216
217

SEE ALSO

219       selinux(8),  accountsd(8), semanage(8), restorecon(8), chcon(1), sepol‐
220       icy(8), setsebool(8)
221
222
223
224accountsd                          23-02-03               accountsd_selinux(8)
Impressum