1accountsd_selinux(8) SELinux Policy accountsd accountsd_selinux(8)
2
6 accountsd_selinux - Security Enhanced Linux Policy for the accountsd
7 processes
8
10 Security-Enhanced Linux secures the accountsd processes via flexible
11 mandatory access control.
12 The accountsd processes execute with the accountsd_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep accountsd_t
20
24 The accountsd_t SELinux type can be entered via the accountsd_exec_t
25 file type.
26 The default entrypoint paths for the accountsd_t domain are the follow‐
28 ing:
29 /usr/libexec/accounts-daemon, /usr/lib/accountsservice/accounts-daemon
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 accountsd policy is very flexible allowing users to setup their ac‐
40 countsd processes in as secure a method as possible.
41 The following process types are defined for accountsd:
43 accountsd_t
45 Note: semanage permissive -a accountsd_t can be used to make the
47 process type accountsd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. ac‐
54 countsd policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run accountsd with the tightest
56 access possible.
57 If you want to dontaudit all daemons scheduling requests (setsched,
61 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
62 Enabled by default.
63 setsebool -P daemons_dontaudit_scheduling 1
65 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70 setsebool -P fips_mode 1
72 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77 setsebool -P nis_enabled 1
79
83 The SELinux process type accountsd_t can manage files labeled with the
84 following file types. The paths listed are the default paths for these
85 file types. Note the processes UID still need to have DAC permissions.
86 accountsd_var_lib_t
88 /var/lib/AccountsService(/.*)?
90 cluster_conf_t
92 /etc/cluster(/.*)?
94 cluster_var_lib_t
96 /var/lib/pcsd(/.*)?
98 /var/lib/cluster(/.*)?
99 /var/lib/openais(/.*)?
100 /var/lib/pengine(/.*)?
101 /var/lib/corosync(/.*)?
102 /usr/lib/heartbeat(/.*)?
103 /var/lib/heartbeat(/.*)?
104 /var/lib/pacemaker(/.*)?
105 cluster_var_run_t
107 /var/run/crm(/.*)?
109 /var/run/cman_.*
110 /var/run/rsctmp(/.*)?
111 /var/run/aisexec.*
112 /var/run/heartbeat(/.*)?
113 /var/run/pcsd-ruby.socket
114 /var/run/corosync-qnetd(/.*)?
115 /var/run/corosync-qdevice(/.*)?
116 /var/run/corosync.pid
117 /var/run/cpglockd.pid
118 /var/run/rgmanager.pid
119 /var/run/cluster/rgmanager.sk
120 krb5_host_rcache_t
122 /var/tmp/krb5_0.rcache2
124 /var/cache/krb5rcache(/.*)?
125 /var/tmp/nfs_0
126 /var/tmp/DNS_25
127 /var/tmp/host_0
128 /var/tmp/imap_0
129 /var/tmp/HTTP_23
130 /var/tmp/HTTP_48
131 /var/tmp/ldap_55
132 /var/tmp/ldap_487
133 /var/tmp/ldapmap1_0
134 root_t
136 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
138 /
139 /initrd
140 xdm_etc_t
142 /etc/[mg]dm(/.*)?
144
147 SELinux requires files to have an extended attribute to define the file
148 type.
149 You can see the context of a file using the -Z option to ls
151 Policy governs the access confined processes have to these files.
153 SELinux accountsd policy is very flexible allowing users to setup their
154 accountsd processes in as secure a method as possible.
155 STANDARD FILE CONTEXT
157 SELinux defines the file context types for the accountsd, if you wanted
159 to store files with these types in a different paths, you need to exe‐
160 cute the semanage command to specify alternate labeling and then use
161 restorecon to put the labels on disk.
162 semanage fcontext -a -t accountsd_exec_t '/srv/accountsd/content(/.*)?'
164 restorecon -R -v /srv/myaccountsd_content
165 Note: SELinux often uses regular expressions to specify labels that
167 match multiple files.
168 The following file types are defined for accountsd:
170 accountsd_exec_t
174 - Set files with the accountsd_exec_t type, if you want to transition
176 an executable to the accountsd_t domain.
177 Paths:
180 /usr/libexec/accounts-daemon, /usr/lib/accountsservice/accounts-
181 daemon
182 accountsd_unit_file_t
185 - Set files with the accountsd_unit_file_t type, if you want to treat
187 the files as accountsd unit content.
188 accountsd_var_lib_t
192 - Set files with the accountsd_var_lib_t type, if you want to store the
194 accountsd files under the /var/lib directory.
195 Note: File context can be temporarily modified with the chcon command.
199 If you want to permanently change the file context you need to use the
200 semanage fcontext command. This will modify the SELinux labeling data‐
201 base. You will need to use restorecon to apply the labels.
202
205 semanage fcontext can also be used to manipulate default file context
206 mappings.
207 semanage permissive can also be used to manipulate whether or not a
209 process type is permissive.
210 semanage module can also be used to enable/disable/install/remove pol‐
212 icy modules.
213 semanage boolean can also be used to manipulate the booleans
215 system-config-selinux is a GUI tool available to customize SELinux pol‐
218 icy settings.
219
222 This manual page was auto-generated using sepolicy manpage .
223
226 selinux(8), accountsd(8), semanage(8), restorecon(8), chcon(1), sepol‐
227 icy(8), setsebool(8)
228accountsd 23-12-15 accountsd_selinux(8)