1portreserve_selinux(8) SELinux Policy portreserve portreserve_selinux(8)
2
6 portreserve_selinux - Security Enhanced Linux Policy for the portre‐
7 serve processes
8
10 Security-Enhanced Linux secures the portreserve processes via flexible
11 mandatory access control.
12 The portreserve processes execute with the portreserve_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep portreserve_t
20
24 The portreserve_t SELinux type can be entered via the portre‐
25 serve_exec_t file type.
26 The default entrypoint paths for the portreserve_t domain are the fol‐
28 lowing:
29 /sbin/portreserve, /usr/sbin/portreserve
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 portreserve policy is very flexible allowing users to setup their
40 portreserve processes in as secure a method as possible.
41 The following process types are defined for portreserve:
43 portreserve_t
45 Note: semanage permissive -a portreserve_t can be used to make the
47 process type portreserve_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. portre‐
54 serve policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run portreserve with the tightest ac‐
56 cess possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type portreserve_t can manage files labeled with
76 the following file types. The paths listed are the default paths for
77 these file types. Note the processes UID still need to have DAC per‐
78 missions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/pcsd-ruby.socket
103 /var/run/corosync-qnetd(/.*)?
104 /var/run/corosync-qdevice(/.*)?
105 /var/run/corosync.pid
106 /var/run/cpglockd.pid
107 /var/run/rgmanager.pid
108 /var/run/cluster/rgmanager.sk
109 krb5_host_rcache_t
111 /var/tmp/krb5_0.rcache2
113 /var/cache/krb5rcache(/.*)?
114 /var/tmp/nfs_0
115 /var/tmp/DNS_25
116 /var/tmp/host_0
117 /var/tmp/imap_0
118 /var/tmp/HTTP_23
119 /var/tmp/HTTP_48
120 /var/tmp/ldap_55
121 /var/tmp/ldap_487
122 /var/tmp/ldapmap1_0
123 portreserve_var_run_t
125 /var/run/portreserve(/.*)?
127 root_t
129 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
131 /
132 /initrd
133
136 SELinux requires files to have an extended attribute to define the file
137 type.
138 You can see the context of a file using the -Z option to ls
140 Policy governs the access confined processes have to these files.
142 SELinux portreserve policy is very flexible allowing users to setup
143 their portreserve processes in as secure a method as possible.
144 STANDARD FILE CONTEXT
146 SELinux defines the file context types for the portreserve, if you
148 wanted to store files with these types in a diffent paths, you need to
149 execute the semanage command to specify alternate labeling and then use
150 restorecon to put the labels on disk.
151 semanage fcontext -a -t portreserve_var_run_t '/srv/myportreserve_con‐
153 tent(/.*)?'
154 restorecon -R -v /srv/myportreserve_content
155 Note: SELinux often uses regular expressions to specify labels that
157 match multiple files.
158 The following file types are defined for portreserve:
160 portreserve_etc_t
164 - Set files with the portreserve_etc_t type, if you want to store
166 portreserve files in the /etc directories.
167 portreserve_exec_t
171 - Set files with the portreserve_exec_t type, if you want to transition
173 an executable to the portreserve_t domain.
174 Paths:
177 /sbin/portreserve, /usr/sbin/portreserve
178 portreserve_initrc_exec_t
181 - Set files with the portreserve_initrc_exec_t type, if you want to
183 transition an executable to the portreserve_initrc_t domain.
184 portreserve_var_run_t
188 - Set files with the portreserve_var_run_t type, if you want to store
190 the portreserve files under the /run or /var/run directory.
191 Note: File context can be temporarily modified with the chcon command.
195 If you want to permanently change the file context you need to use the
196 semanage fcontext command. This will modify the SELinux labeling data‐
197 base. You will need to use restorecon to apply the labels.
198
201 semanage fcontext can also be used to manipulate default file context
202 mappings.
203 semanage permissive can also be used to manipulate whether or not a
205 process type is permissive.
206 semanage module can also be used to enable/disable/install/remove pol‐
208 icy modules.
209 semanage boolean can also be used to manipulate the booleans
211 system-config-selinux is a GUI tool available to customize SELinux pol‐
214 icy settings.
215
218 This manual page was auto-generated using sepolicy manpage .
219
222 selinux(8), portreserve(8), semanage(8), restorecon(8), chcon(1), se‐
223 policy(8), setsebool(8)
224portreserve 23-02-03 portreserve_selinux(8)