1portreserve_selinux(8) SELinux Policy portreserve portreserve_selinux(8)
2
6 portreserve_selinux - Security Enhanced Linux Policy for the portre‐
7 serve processes
8
10 Security-Enhanced Linux secures the portreserve processes via flexible
11 mandatory access control.
12 The portreserve processes execute with the portreserve_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep portreserve_t
20
24 The portreserve_t SELinux type can be entered via the portre‐
25 serve_exec_t file type.
26 The default entrypoint paths for the portreserve_t domain are the fol‐
28 lowing:
29 /sbin/portreserve, /usr/sbin/portreserve
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 portreserve policy is very flexible allowing users to setup their
40 portreserve processes in as secure a method as possible.
41 The following process types are defined for portreserve:
43 portreserve_t
45 Note: semanage permissive -a portreserve_t can be used to make the
47 process type portreserve_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. portre‐
54 serve policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run portreserve with the tightest ac‐
56 cess possible.
57 If you want to dontaudit all daemons scheduling requests (setsched,
61 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
62 Enabled by default.
63 setsebool -P daemons_dontaudit_scheduling 1
65 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70 setsebool -P fips_mode 1
72 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77 setsebool -P nis_enabled 1
79
83 The SELinux process type portreserve_t can manage files labeled with
84 the following file types. The paths listed are the default paths for
85 these file types. Note the processes UID still need to have DAC per‐
86 missions.
87 cluster_conf_t
89 /etc/cluster(/.*)?
91 cluster_var_lib_t
93 /var/lib/pcsd(/.*)?
95 /var/lib/cluster(/.*)?
96 /var/lib/openais(/.*)?
97 /var/lib/pengine(/.*)?
98 /var/lib/corosync(/.*)?
99 /usr/lib/heartbeat(/.*)?
100 /var/lib/heartbeat(/.*)?
101 /var/lib/pacemaker(/.*)?
102 cluster_var_run_t
104 /var/run/crm(/.*)?
106 /var/run/cman_.*
107 /var/run/rsctmp(/.*)?
108 /var/run/aisexec.*
109 /var/run/heartbeat(/.*)?
110 /var/run/pcsd-ruby.socket
111 /var/run/corosync-qnetd(/.*)?
112 /var/run/corosync-qdevice(/.*)?
113 /var/run/corosync.pid
114 /var/run/cpglockd.pid
115 /var/run/rgmanager.pid
116 /var/run/cluster/rgmanager.sk
117 krb5_host_rcache_t
119 /var/tmp/krb5_0.rcache2
121 /var/cache/krb5rcache(/.*)?
122 /var/tmp/nfs_0
123 /var/tmp/DNS_25
124 /var/tmp/host_0
125 /var/tmp/imap_0
126 /var/tmp/HTTP_23
127 /var/tmp/HTTP_48
128 /var/tmp/ldap_55
129 /var/tmp/ldap_487
130 /var/tmp/ldapmap1_0
131 portreserve_var_run_t
133 /var/run/portreserve(/.*)?
135 root_t
137 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
139 /
140 /initrd
141
144 SELinux requires files to have an extended attribute to define the file
145 type.
146 You can see the context of a file using the -Z option to ls
148 Policy governs the access confined processes have to these files.
150 SELinux portreserve policy is very flexible allowing users to setup
151 their portreserve processes in as secure a method as possible.
152 STANDARD FILE CONTEXT
154 SELinux defines the file context types for the portreserve, if you
156 wanted to store files with these types in a different paths, you need
157 to execute the semanage command to specify alternate labeling and then
158 use restorecon to put the labels on disk.
159 semanage fcontext -a -t portreserve_exec_t '/srv/portreserve/con‐
161 tent(/.*)?'
162 restorecon -R -v /srv/myportreserve_content
163 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166 The following file types are defined for portreserve:
168 portreserve_etc_t
172 - Set files with the portreserve_etc_t type, if you want to store
174 portreserve files in the /etc directories.
175 portreserve_exec_t
179 - Set files with the portreserve_exec_t type, if you want to transition
181 an executable to the portreserve_t domain.
182 Paths:
185 /sbin/portreserve, /usr/sbin/portreserve
186 portreserve_initrc_exec_t
189 - Set files with the portreserve_initrc_exec_t type, if you want to
191 transition an executable to the portreserve_initrc_t domain.
192 portreserve_var_run_t
196 - Set files with the portreserve_var_run_t type, if you want to store
198 the portreserve files under the /run or /var/run directory.
199 Note: File context can be temporarily modified with the chcon command.
203 If you want to permanently change the file context you need to use the
204 semanage fcontext command. This will modify the SELinux labeling data‐
205 base. You will need to use restorecon to apply the labels.
206
209 semanage fcontext can also be used to manipulate default file context
210 mappings.
211 semanage permissive can also be used to manipulate whether or not a
213 process type is permissive.
214 semanage module can also be used to enable/disable/install/remove pol‐
216 icy modules.
217 semanage boolean can also be used to manipulate the booleans
219 system-config-selinux is a GUI tool available to customize SELinux pol‐
222 icy settings.
223
226 This manual page was auto-generated using sepolicy manpage .
227
230 selinux(8), portreserve(8), semanage(8), restorecon(8), chcon(1), se‐
231 policy(8), setsebool(8)
232portreserve 23-12-15 portreserve_selinux(8)