1CGPS(1) GPSD Documentation CGPS(1)
2
6 cgps - curses terminal client for gpsd
7
9 cgps [OPTIONS] [server[:port[:device]]]
10 cgps -h
12 cgps -V
14
16 cgps is an ncurses based gpsd client. It is able to run on a serial
17 terminal or terminal emulator. It resembles xgps(1), but without the
18 pictorial satellite display and does not require X or other windowing
19 system.
20 cgps does not require root privileges. It will also run fine as root.
22 Running under sudo will cause loss of functionality.
23 None of the error estimates provided by gpsd, and displayed by cgps,
25 should be taken as anything other than "goodness" levels. GNSS receiver
26 manufactures often do not document the basis for their estimates. Those
27 that do document their estimates are inconsistent about what they mean.
28
30 -?, -h, --help
31 Print a summary of options and then exit.
32 -D LVL, --debug LVL
34 Sets the debug level; it is primarily for use by GPSD developers.
35 It enables various progress messages to standard error.
36 -i, --imu
38 Show IMU instead of fix and satellite data.
39 -l FMT, --llfmt FMT
41 Sets the format of latitude and longitude reports. The value 'd'
42 produces decimal degrees and is the default. The value 'm' produces
43 degrees and decimal minutes. The value 's' produces degrees,
44 minutes, and decimal seconds.
45 -m, --magtrack
47 Display tracks as magnetic, not true.
48 -m, --magtrack
50 Display your magnetic track (as opposed to your true track). This
51 is a calculated value, not a measured value. Magnetic variation is
52 always potentially subject to large errors, but is usually better
53 than two degrees.
54 -s, --silent
56 Prevents cgps from displaying the raw data coming from the daemon.
57 This display can also be toggled with the s command.
58 -u UNITS, --units UNITS
60 Set the system units for display; follow the keyword with 'i' for
61 'imperial' for American units (International Feet in altitude and
62 error estimates, miles per hour in speeds), 'n' for 'nautical'
63 (feet in altitude and error estimates, knots in speed) or 'm' for
64 'metric' (meters in altitude and error estimates, kilometers per
65 hour in speeds).
66 Note: The USA Survey Foot is not supported.
68 -V, --version
70 Print the package version and exit.
71
73 By default, clients collect data from the local gpsd daemon running on
74 localhost, using the default GPSD port 2947. The optional argument to
75 any client may override this behavior: [server[:port[:device]]]
76 For further explanation, and examples, see the ARGUMENTS section in the
78 gps(1) man page
79
81 cgps terminates when you send it a SIGHUP or SIGINT; given default
82 terminal settings this will happen when you type Ctrl-C at it.
83 cgps will accept a few single letter commands while running:
85 c
87 Clear the bottom window.
88 d
90 Show lat/lon dd.dddddddd, dd mm.mmmmmm and dd mm ss.ssss
91 h
93 Popup a help window.
94 i
96 Use imperial units.
97 m
99 Use metric units.
100 n
102 Use nautical units.
103 q
105 Clear screen and exit
106 s
108 Toggle showing raw JSON data in the bottom window.
109 t
111 Toggle true/magnetic track.
112
114 The environment variable GPSD_UNITS is checked if no unit system is
115 specified on the command line. It may be set to 'i'. 'imperial', 'm',
116 'metric', or 'n', 'nautical'.
117 LC_MEASUREMENT and then LANG are checked if no unit system has been
119 specified on the command line, or in GPSD_UNITS. If the value is 'C',
120 'POSIX', or begins with 'en_US' the unit system is set to imperial. The
121 default if no system has been selected defaults to metric.
122
124 0
125 on success.
126 1
128 on failure
129
131 gegps(1), gpsctl(1), gps(1), gpsprof*(1), gpsfake(1), gpscat(1),
132 gpspipe(1), gpsmon(1), xgps*(1). xgpsspeed(1)
133 libgps(3), libgpsmm(3)
135 gpsd(8)
137
139 Project web site: https://gpsd.io/
140
142 This file is Copyright 2013 by the GPSD project
143 SPDX-License-Identifier: BSD-2-clause
144GPSD Version 3.24 2022-04-27 CGPS(1)