stalld_selinux(8)

1stalld_selinux(8)            SELinux Policy stalld           stalld_selinux(8)
2
3
4

NAME

6       stalld_selinux  -  Security  Enhanced  Linux Policy for the stalld pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  stalld  processes  via  flexible
11       mandatory access control.
12
13       The  stalld  processes  execute with the stalld_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep stalld_t
20
21
22

ENTRYPOINTS

24       The  stalld_t  SELinux  type  can be entered via the stalld_exec_t file
25       type.
26
27       The default entrypoint paths for the stalld_t domain are the following:
28
29       /usr/bin/stalld
30

PROCESS TYPES

32       SELinux defines process types (domains) for each process running on the
33       system
34
35       You can see the context of a process using the -Z option to ps
36
37       Policy  governs  the  access confined processes have to files.  SELinux
38       stalld policy is very flexible allowing users  to  setup  their  stalld
39       processes in as secure a method as possible.
40
41       The following process types are defined for stalld:
42
43       stalld_t
44
45       Note:  semanage  permissive -a stalld_t can be used to make the process
46       type stalld_t permissive. SELinux does not deny  access  to  permissive
47       process  types, but the AVC (SELinux denials) messages are still gener‐
48       ated.
49
50

BOOLEANS

52       SELinux policy is customizable based on least access required.   stalld
53       policy is extremely flexible and has several booleans that allow you to
54       manipulate the policy and run stalld with the tightest access possible.
55
56
57
58       If you want to allow all domains to execute in fips_mode, you must turn
59       on the fips_mode boolean. Enabled by default.
60
61       setsebool -P fips_mode 1
62
63
64

MANAGED FILES

66       The  SELinux  process  type  stalld_t can manage files labeled with the
67       following file types.  The paths listed are the default paths for these
68       file types.  Note the processes UID still need to have DAC permissions.
69
70       cluster_conf_t
71
72            /etc/cluster(/.*)?
73
74       cluster_var_lib_t
75
76            /var/lib/pcsd(/.*)?
77            /var/lib/cluster(/.*)?
78            /var/lib/openais(/.*)?
79            /var/lib/pengine(/.*)?
80            /var/lib/corosync(/.*)?
81            /usr/lib/heartbeat(/.*)?
82            /var/lib/heartbeat(/.*)?
83            /var/lib/pacemaker(/.*)?
84
85       cluster_var_run_t
86
87            /var/run/crm(/.*)?
88            /var/run/cman_.*
89            /var/run/rsctmp(/.*)?
90            /var/run/aisexec.*
91            /var/run/heartbeat(/.*)?
92            /var/run/pcsd-ruby.socket
93            /var/run/corosync-qnetd(/.*)?
94            /var/run/corosync-qdevice(/.*)?
95            /var/run/corosync.pid
96            /var/run/cpglockd.pid
97            /var/run/rgmanager.pid
98            /var/run/cluster/rgmanager.sk
99
100       debugfs_t
101
102            /sys/kernel/debug
103
104       root_t
105
106            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
107            /
108            /initrd
109
110       stalld_var_run_t
111
112            /var/run/stalld.pid
113
114

FILE CONTEXTS

116       SELinux requires files to have an extended attribute to define the file
117       type.
118
119       You can see the context of a file using the -Z option to ls
120
121       Policy governs the access  confined  processes  have  to  these  files.
122       SELinux  stalld  policy  is very flexible allowing users to setup their
123       stalld processes in as secure a method as possible.
124
125       STANDARD FILE CONTEXT
126
127       SELinux defines the file context types for the stalld, if you wanted to
128       store  files  with  these types in a diffent paths, you need to execute
129       the semanage command to specify alternate labeling  and  then  use  re‐
130       storecon to put the labels on disk.
131
132       semanage fcontext -a -t stalld_var_run_t '/srv/mystalld_content(/.*)?'
133       restorecon -R -v /srv/mystalld_content
134
135       Note:  SELinux  often  uses  regular expressions to specify labels that
136       match multiple files.
137
138       The following file types are defined for stalld:
139
140
141
142       stalld_exec_t
143
144       - Set files with the stalld_exec_t type, if you want to  transition  an
145       executable to the stalld_t domain.
146
147
148
149       stalld_unit_file_t
150
151       -  Set files with the stalld_unit_file_t type, if you want to treat the
152       files as stalld unit content.
153
154
155
156       stalld_var_run_t
157
158       - Set files with the stalld_var_run_t type, if you want  to  store  the
159       stalld files under the /run or /var/run directory.
160
161
162
163       Note:  File context can be temporarily modified with the chcon command.
164       If you want to permanently change the file context you need to use  the
165       semanage fcontext command.  This will modify the SELinux labeling data‐
166       base.  You will need to use restorecon to apply the labels.
167
168

COMMANDS

170       semanage fcontext can also be used to manipulate default  file  context
171       mappings.
172
173       semanage  permissive  can  also  be used to manipulate whether or not a
174       process type is permissive.
175
176       semanage module can also be used to enable/disable/install/remove  pol‐
177       icy modules.
178
179       semanage boolean can also be used to manipulate the booleans
180
181
182       system-config-selinux is a GUI tool available to customize SELinux pol‐
183       icy settings.
184
185

AUTHOR

187       This manual page was auto-generated using sepolicy manpage .
188
189