1METASYS(8)                  Network UPS Tools (NUT)                 METASYS(8)
2
3
4

NAME

6       metasys - Driver for Meta System UPS equipment
7

NOTE

9       This  man  page  only  documents  the hardware-specific features of the
10       metasys driver.  For information about the  core  driver,  see  nutups‐
11       drv(8).
12
13

SUPPORTED HARDWARE

15       Metasys  driver  have  been  written with the "Meta System UPS Protocol
16       Rev.1.12" kindly supplied from Meta System.
17
18       The driver should support all the common features of the ups models:
19        - HF Line (/2) 1-8 boards
20        - HF Millennium (810, 820)
21        - HF TOP Line (910, 920, 930, 940, 950, 970, 980)
22        - ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
23        - ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
24        - ally HF (800, 1000, 1250, 1600, 2000, 2500)
25        - Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)
26
27
28

CABLING

30       The needed cable is a standard pin-to-pin serial cable with, at  least,
31       pins 2, 3, and 5 (on DB9 connector) connected.
32
33

EXTRA ARGUMENTS

35       This driver supports no extra arguments from the ups.conf(5)
36
37

BUGS

39       This  driver  has been tested on Meta System HF Millennium 820 and ally
40       HF 1000 only.  Any informations about the use of the  driver  with  the
41       other listed ups are really welcome.
42
43

AUTHOR

45       Fabio Di Niro <blaxwan@users.sourceforge.net>
46
47

SEE ALSO

49   The core driver:
50       nutupsdrv(8)
51
52
53   The metasys driver:
54       metasys(8)
55
56
57   Internet resources:
58       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
59
60
61
62                                Mon May 17 2004                     METASYS(8)
Impressum