sane-sm3600(5)

1sane-sm3600(5)           SANE Scanner Access Now Easy           sane-sm3600(5)
2
3
4

NAME

6       sane-sm3600 - SANE backend for Microtek scanners with M011 USB chip
7

DESCRIPTION

9       The  sane-sm3600  library  implements  a SANE (Scanner Access Now Easy)
10       backend that provides access to some Microtek scanners with the Toshiba
11       M011 custom USB chip.  This backend should be considered alpha.
12
13       There  are  also  backends for Microtek scanners with SCSI command set.
14       Refer to sane-microtek(5) and sane-microtek2(5) for details.
15
16       At present, the following scanners are known positively  to  work  with
17       this backend:
18
19              Vendor     Product id:     Remark:
20              --------   --------------  -----------
21              Microtek   ScanMaker 3600  all modes ok
22              Microtek   ScanMaker 3700  reported to work
23              Microtek   ScanMaker 3750  reported to work
24
25       If  you  own  a Microtek scanner with the M011 chip other than the ones
26       listed above, it may or may not work with SANE!
27
28

FRONTEND OPTIONS

30       This backend dynamically enables the options for the frontend, that are
31       supported  by  the scanner in dependence of the scanning-mode and other
32       options. Not supported options are disabled.
33
34       The following options are supported by the Microtek2-driver:
35
36       Color, grayscale, halftone and lineart scans.
37
38       contrast, brightness, control, gamma correction.
39
40

DEVICE NAMES

42       This backend does not support device names in a standardized form.
43
44

CONFIGURATION

46       This backend does not support a configuration file right now.
47
48

FILES

50       /usr/lib*/sane/libsane-sm3600.a
51              The static library implementing this backend.
52
53       /usr/lib*/sane/libsane-sm3600.so
54              The shared library implementing this backend (present on systems
55              that support dynamic loading).
56
57

ENVIRONMENT

59       SANE_DEBUG_SM3600
60              If  the  library  was  compiled with debug support enabled, this
61              environment variable controls the debug level for this  backend.
62              E.g.,  a  value  of 128 requests all debug output to be printed.
63              Smaller levels reduce verbosity. To see error messages on stderr
64              set SANE_DEBUG_SM3600 to 1.
65
66              E.g. just say:
67              export SANE_DEBUG_SM3600=5
68
69

AUTHOR

75       Marian Eichholz (eichholz@computer.org)
76       Glenn Ramsey (glenn@componic.com)
77
78
79
80
81sane-backends 1.0.18            16 August 2005                  sane-sm3600(5)