1systemd_bootchart_selinuSxE(L8i)nux Policy systemd_bootcshyasrttemd_bootchart_selinux(8)
2
6 systemd_bootchart_selinux - Security Enhanced Linux Policy for the sys‐
7 temd_bootchart processes
8
10 Security-Enhanced Linux secures the systemd_bootchart processes via
11 flexible mandatory access control.
12 The systemd_bootchart processes execute with the systemd_bootchart_t
14 SELinux type. You can check if you have these processes running by exe‐
15 cuting the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep systemd_bootchart_t
20
24 The systemd_bootchart_t SELinux type can be entered via the sys‐
25 temd_bootchart_exec_t file type.
26 The default entrypoint paths for the systemd_bootchart_t domain are the
28 following:
29 /usr/lib/systemd/systemd-bootchart
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 systemd_bootchart policy is very flexible allowing users to setup their
40 systemd_bootchart processes in as secure a method as possible.
41 The following process types are defined for systemd_bootchart:
43 systemd_bootchart_t
45 Note: semanage permissive -a systemd_bootchart_t can be used to make
47 the process type systemd_bootchart_t permissive. SELinux does not deny
48 access to permissive process types, but the AVC (SELinux denials) mes‐
49 sages are still generated.
50
53 SELinux policy is customizable based on least access required. sys‐
54 temd_bootchart policy is extremely flexible and has several booleans
55 that allow you to manipulate the policy and run systemd_bootchart with
56 the tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type systemd_bootchart_t can manage files labeled
76 with the following file types. The paths listed are the default paths
77 for these file types. Note the processes UID still need to have DAC
78 permissions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108 root_t
110 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
112 /
113 /initrd
114 systemd_bootchart_tmpfs_t
116 systemd_bootchart_var_run_t
119 /var/run/log/bootchart.*
121
124 SELinux requires files to have an extended attribute to define the file
125 type.
126 You can see the context of a file using the -Z option to ls
128 Policy governs the access confined processes have to these files.
130 SELinux systemd_bootchart policy is very flexible allowing users to
131 setup their systemd_bootchart processes in as secure a method as possi‐
132 ble.
133 STANDARD FILE CONTEXT
135 SELinux defines the file context types for the systemd_bootchart, if
137 you wanted to store files with these types in a diffent paths, you need
138 to execute the semanage command to sepecify alternate labeling and then
139 use restorecon to put the labels on disk.
140 semanage fcontext -a -t systemd_bootchart_tmpfs_t '/srv/mysys‐
142 temd_bootchart_content(/.*)?'
143 restorecon -R -v /srv/mysystemd_bootchart_content
144 Note: SELinux often uses regular expressions to specify labels that
146 match multiple files.
147 The following file types are defined for systemd_bootchart:
149 systemd_bootchart_exec_t
153 - Set files with the systemd_bootchart_exec_t type, if you want to
155 transition an executable to the systemd_bootchart_t domain.
156 systemd_bootchart_tmpfs_t
160 - Set files with the systemd_bootchart_tmpfs_t type, if you want to
162 store systemd bootchart files on a tmpfs file system.
163 systemd_bootchart_unit_file_t
167 - Set files with the systemd_bootchart_unit_file_t type, if you want to
169 treat the files as systemd bootchart unit content.
170 systemd_bootchart_var_run_t
174 - Set files with the systemd_bootchart_var_run_t type, if you want to
176 store the systemd bootchart files under the /run or /var/run directory.
177 Note: File context can be temporarily modified with the chcon command.
181 If you want to permanently change the file context you need to use the
182 semanage fcontext command. This will modify the SELinux labeling data‐
183 base. You will need to use restorecon to apply the labels.
184
187 semanage fcontext can also be used to manipulate default file context
188 mappings.
189 semanage permissive can also be used to manipulate whether or not a
191 process type is permissive.
192 semanage module can also be used to enable/disable/install/remove pol‐
194 icy modules.
195 semanage boolean can also be used to manipulate the booleans
197 system-config-selinux is a GUI tool available to customize SELinux pol‐
200 icy settings.
201
204 This manual page was auto-generated using sepolicy manpage .
205
208 selinux(8), systemd_bootchart(8), semanage(8), restorecon(8), chcon(1),
209 sepolicy(8), setsebool(8)
210systemd_bootchart 21-03-26 systemd_bootchart_selinux(8)