1systemd_bootchart_selinuSxE(L8i)nux Policy systemd_bootcshyasrttemd_bootchart_selinux(8)
2
3
4

NAME

6       systemd_bootchart_selinux - Security Enhanced Linux Policy for the sys‐
7       temd_bootchart processes
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  systemd_bootchart  processes  via
11       flexible mandatory access control.
12
13       The  systemd_bootchart  processes  execute with the systemd_bootchart_t
14       SELinux type. You can check if you have these processes running by exe‐
15       cuting the ps command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep systemd_bootchart_t
20
21
22

ENTRYPOINTS

24       The  systemd_bootchart_t  SELinux  type  can  be  entered  via the sys‐
25       temd_bootchart_exec_t file type.
26
27       The default entrypoint paths for the systemd_bootchart_t domain are the
28       following:
29
30       /usr/lib/systemd/systemd-bootchart
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       systemd_bootchart policy is very flexible allowing users to setup their
40       systemd_bootchart processes in as secure a method as possible.
41
42       The following process types are defined for systemd_bootchart:
43
44       systemd_bootchart_t
45
46       Note: semanage permissive -a systemd_bootchart_t can be  used  to  make
47       the  process type systemd_bootchart_t permissive. SELinux does not deny
48       access to permissive process types, but the AVC (SELinux denials)  mes‐
49       sages are still generated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable based on least access required.  sys‐
54       temd_bootchart policy is extremely flexible and  has  several  booleans
55       that  allow you to manipulate the policy and run systemd_bootchart with
56       the tightest access possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to  allow  system  to run with NIS, you must turn on the
68       nis_enabled boolean. Disabled by default.
69
70       setsebool -P nis_enabled 1
71
72
73

MANAGED FILES

75       The SELinux process type systemd_bootchart_t can manage  files  labeled
76       with  the following file types.  The paths listed are the default paths
77       for these file types.  Note the processes UID still need  to  have  DAC
78       permissions.
79
80       cluster_conf_t
81
82            /etc/cluster(/.*)?
83
84       cluster_var_lib_t
85
86            /var/lib/pcsd(/.*)?
87            /var/lib/cluster(/.*)?
88            /var/lib/openais(/.*)?
89            /var/lib/pengine(/.*)?
90            /var/lib/corosync(/.*)?
91            /usr/lib/heartbeat(/.*)?
92            /var/lib/heartbeat(/.*)?
93            /var/lib/pacemaker(/.*)?
94
95       cluster_var_run_t
96
97            /var/run/crm(/.*)?
98            /var/run/cman_.*
99            /var/run/rsctmp(/.*)?
100            /var/run/aisexec.*
101            /var/run/heartbeat(/.*)?
102            /var/run/pcsd-ruby.socket
103            /var/run/corosync-qnetd(/.*)?
104            /var/run/corosync-qdevice(/.*)?
105            /var/run/corosync.pid
106            /var/run/cpglockd.pid
107            /var/run/rgmanager.pid
108            /var/run/cluster/rgmanager.sk
109
110       krb5_host_rcache_t
111
112            /var/tmp/krb5_0.rcache2
113            /var/cache/krb5rcache(/.*)?
114            /var/tmp/nfs_0
115            /var/tmp/DNS_25
116            /var/tmp/host_0
117            /var/tmp/imap_0
118            /var/tmp/HTTP_23
119            /var/tmp/HTTP_48
120            /var/tmp/ldap_55
121            /var/tmp/ldap_487
122            /var/tmp/ldapmap1_0
123
124       root_t
125
126            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127            /
128            /initrd
129
130       systemd_bootchart_tmpfs_t
131
132
133       systemd_bootchart_var_run_t
134
135            /var/run/log/bootchart.*
136
137

FILE CONTEXTS

139       SELinux requires files to have an extended attribute to define the file
140       type.
141
142       You can see the context of a file using the -Z option to ls
143
144       Policy governs the access  confined  processes  have  to  these  files.
145       SELinux  systemd_bootchart  policy  is  very flexible allowing users to
146       setup their systemd_bootchart processes in as secure a method as possi‐
147       ble.
148
149       STANDARD FILE CONTEXT
150
151       SELinux  defines  the  file context types for the systemd_bootchart, if
152       you wanted to store files with these types in a diffent paths, you need
153       to execute the semanage command to sepecify alternate labeling and then
154       use restorecon to put the labels on disk.
155
156       semanage  fcontext   -a   -t   systemd_bootchart_tmpfs_t   '/srv/mysys‐
157       temd_bootchart_content(/.*)?'
158       restorecon -R -v /srv/mysystemd_bootchart_content
159
160       Note:  SELinux  often  uses  regular expressions to specify labels that
161       match multiple files.
162
163       The following file types are defined for systemd_bootchart:
164
165
166
167       systemd_bootchart_exec_t
168
169       - Set files with the systemd_bootchart_exec_t  type,  if  you  want  to
170       transition an executable to the systemd_bootchart_t domain.
171
172
173
174       systemd_bootchart_tmpfs_t
175
176       -  Set  files  with  the systemd_bootchart_tmpfs_t type, if you want to
177       store systemd bootchart files on a tmpfs file system.
178
179
180
181       systemd_bootchart_unit_file_t
182
183       - Set files with the systemd_bootchart_unit_file_t type, if you want to
184       treat the files as systemd bootchart unit content.
185
186
187
188       systemd_bootchart_var_run_t
189
190       -  Set  files with the systemd_bootchart_var_run_t type, if you want to
191       store the systemd bootchart files under the /run or /var/run directory.
192
193
194
195       Note: File context can be temporarily modified with the chcon  command.
196       If  you want to permanently change the file context you need to use the
197       semanage fcontext command.  This will modify the SELinux labeling data‐
198       base.  You will need to use restorecon to apply the labels.
199
200

COMMANDS

202       semanage  fcontext  can also be used to manipulate default file context
203       mappings.
204
205       semanage permissive can also be used to manipulate  whether  or  not  a
206       process type is permissive.
207
208       semanage  module can also be used to enable/disable/install/remove pol‐
209       icy modules.
210
211       semanage boolean can also be used to manipulate the booleans
212
213
214       system-config-selinux is a GUI tool available to customize SELinux pol‐
215       icy settings.
216
217

AUTHOR

219       This manual page was auto-generated using sepolicy manpage .
220
221

SEE ALSO

223       selinux(8), systemd_bootchart(8), semanage(8), restorecon(8), chcon(1),
224       sepolicy(8), setsebool(8)
225
226
227
228systemd_bootchart                  21-06-09       systemd_bootchart_selinux(8)
Impressum