1systemd_bootchart_selinuSxE(L8i)nux Policy systemd_bootcshyasrttemd_bootchart_selinux(8)
2
6 systemd_bootchart_selinux - Security Enhanced Linux Policy for the sys‐
7 temd_bootchart processes
8
10 Security-Enhanced Linux secures the systemd_bootchart processes via
11 flexible mandatory access control.
12 The systemd_bootchart processes execute with the systemd_bootchart_t
14 SELinux type. You can check if you have these processes running by exe‐
15 cuting the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep systemd_bootchart_t
20
24 The systemd_bootchart_t SELinux type can be entered via the sys‐
25 temd_bootchart_exec_t file type.
26 The default entrypoint paths for the systemd_bootchart_t domain are the
28 following:
29 /usr/lib/systemd/systemd-bootchart
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 systemd_bootchart policy is very flexible allowing users to setup their
40 systemd_bootchart processes in as secure a method as possible.
41 The following process types are defined for systemd_bootchart:
43 systemd_bootchart_t
45 Note: semanage permissive -a systemd_bootchart_t can be used to make
47 the process type systemd_bootchart_t permissive. SELinux does not deny
48 access to permissive process types, but the AVC (SELinux denials) mes‐
49 sages are still generated.
50
53 SELinux policy is customizable based on least access required. sys‐
54 temd_bootchart policy is extremely flexible and has several booleans
55 that allow you to manipulate the policy and run systemd_bootchart with
56 the tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type systemd_bootchart_t can manage files labeled
76 with the following file types. The paths listed are the default paths
77 for these file types. Note the processes UID still need to have DAC
78 permissions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/pcsd-ruby.socket
103 /var/run/corosync-qnetd(/.*)?
104 /var/run/corosync-qdevice(/.*)?
105 /var/run/corosync.pid
106 /var/run/cpglockd.pid
107 /var/run/rgmanager.pid
108 /var/run/cluster/rgmanager.sk
109 krb5_host_rcache_t
111 /var/tmp/krb5_0.rcache2
113 /var/cache/krb5rcache(/.*)?
114 /var/tmp/nfs_0
115 /var/tmp/DNS_25
116 /var/tmp/host_0
117 /var/tmp/imap_0
118 /var/tmp/HTTP_23
119 /var/tmp/HTTP_48
120 /var/tmp/ldap_55
121 /var/tmp/ldap_487
122 /var/tmp/ldapmap1_0
123 root_t
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127 /
128 /initrd
129 systemd_bootchart_tmpfs_t
131 systemd_bootchart_var_run_t
134 /var/run/log/bootchart.*
136
139 SELinux requires files to have an extended attribute to define the file
140 type.
141 You can see the context of a file using the -Z option to ls
143 Policy governs the access confined processes have to these files.
145 SELinux systemd_bootchart policy is very flexible allowing users to
146 setup their systemd_bootchart processes in as secure a method as possi‐
147 ble.
148 STANDARD FILE CONTEXT
150 SELinux defines the file context types for the systemd_bootchart, if
152 you wanted to store files with these types in a diffent paths, you need
153 to execute the semanage command to specify alternate labeling and then
154 use restorecon to put the labels on disk.
155 semanage fcontext -a -t systemd_bootchart_tmpfs_t '/srv/mysys‐
157 temd_bootchart_content(/.*)?'
158 restorecon -R -v /srv/mysystemd_bootchart_content
159 Note: SELinux often uses regular expressions to specify labels that
161 match multiple files.
162 The following file types are defined for systemd_bootchart:
164 systemd_bootchart_exec_t
168 - Set files with the systemd_bootchart_exec_t type, if you want to
170 transition an executable to the systemd_bootchart_t domain.
171 systemd_bootchart_tmpfs_t
175 - Set files with the systemd_bootchart_tmpfs_t type, if you want to
177 store systemd bootchart files on a tmpfs file system.
178 systemd_bootchart_unit_file_t
182 - Set files with the systemd_bootchart_unit_file_t type, if you want to
184 treat the files as systemd bootchart unit content.
185 systemd_bootchart_var_run_t
189 - Set files with the systemd_bootchart_var_run_t type, if you want to
191 store the systemd bootchart files under the /run or /var/run directory.
192 Note: File context can be temporarily modified with the chcon command.
196 If you want to permanently change the file context you need to use the
197 semanage fcontext command. This will modify the SELinux labeling data‐
198 base. You will need to use restorecon to apply the labels.
199
202 semanage fcontext can also be used to manipulate default file context
203 mappings.
204 semanage permissive can also be used to manipulate whether or not a
206 process type is permissive.
207 semanage module can also be used to enable/disable/install/remove pol‐
209 icy modules.
210 semanage boolean can also be used to manipulate the booleans
212 system-config-selinux is a GUI tool available to customize SELinux pol‐
215 icy settings.
216
219 This manual page was auto-generated using sepolicy manpage .
220
223 selinux(8), systemd_bootchart(8), semanage(8), restorecon(8), chcon(1),
224 sepolicy(8), setsebool(8)
225systemd_bootchart 21-11-19 systemd_bootchart_selinux(8)