1useradd_selinux(8)          SELinux Policy useradd          useradd_selinux(8)
2
3
4

NAME

6       useradd_selinux  -  Security Enhanced Linux Policy for the useradd pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  useradd  processes  via  flexible
11       mandatory access control.
12
13       The  useradd processes execute with the useradd_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep useradd_t
20
21
22

ENTRYPOINTS

24       The  useradd_t  SELinux  type can be entered via the user_home_t, user‐
25       add_exec_t file types.
26
27       The default entrypoint paths for the useradd_t domain are  the  follow‐
28       ing:
29
30       /home/[^/]+/.+,  /usr/sbin/useradd,  /usr/sbin/userdel, /usr/sbin/user‐
31       mod, /usr/sbin/newusers
32

PROCESS TYPES

34       SELinux defines process types (domains) for each process running on the
35       system
36
37       You can see the context of a process using the -Z option to ps
38
39       Policy  governs  the  access confined processes have to files.  SELinux
40       useradd policy is very flexible allowing users to setup  their  useradd
41       processes in as secure a method as possible.
42
43       The following process types are defined for useradd:
44
45       useradd_t
46
47       Note:  semanage permissive -a useradd_t can be used to make the process
48       type useradd_t permissive. SELinux does not deny access  to  permissive
49       process  types, but the AVC (SELinux denials) messages are still gener‐
50       ated.
51
52

BOOLEANS

54       SELinux policy is customizable based on least access required.  useradd
55       policy is extremely flexible and has several booleans that allow you to
56       manipulate the policy and run useradd with the tightest  access  possi‐
57       ble.
58
59
60
61       If you want to allow all domains to execute in fips_mode, you must turn
62       on the fips_mode boolean. Enabled by default.
63
64       setsebool -P fips_mode 1
65
66
67
68       If you want to allow system to run with  NIS,  you  must  turn  on  the
69       nis_enabled boolean. Disabled by default.
70
71       setsebool -P nis_enabled 1
72
73
74
75       If  you want to allow samba to act as the domain controller, add users,
76       groups and change passwords, you must  turn  on  the  samba_domain_con‐
77       troller boolean. Disabled by default.
78
79       setsebool -P samba_domain_controller 1
80
81
82
83       If  you  want  to  support  NFS  home directories, you must turn on the
84       use_nfs_home_dirs boolean. Disabled by default.
85
86       setsebool -P use_nfs_home_dirs 1
87
88
89
90       If you want to support SAMBA home directories, you  must  turn  on  the
91       use_samba_home_dirs boolean. Disabled by default.
92
93       setsebool -P use_samba_home_dirs 1
94
95
96

MANAGED FILES

98       The  SELinux  process  type useradd_t can manage files labeled with the
99       following file types.  The paths listed are the default paths for these
100       file types.  Note the processes UID still need to have DAC permissions.
101
102       cifs_t
103
104
105       default_context_t
106
107            /etc/selinux/([^/]*/)?contexts(/.*)?
108            /root/.default_contexts
109
110       faillog_t
111
112            /var/log/btmp.*
113            /var/log/faillog.*
114            /var/log/tallylog.*
115            /var/run/faillock(/.*)?
116
117       httpd_user_content_type
118
119
120       initrc_var_run_t
121
122            /var/run/utmp
123            /var/run/random-seed
124            /var/run/runlevel.dir
125            /var/run/setmixer_flag
126
127       krb5_host_rcache_t
128
129            /var/tmp/krb5_0.rcache2
130            /var/cache/krb5rcache(/.*)?
131            /var/tmp/nfs_0
132            /var/tmp/DNS_25
133            /var/tmp/host_0
134            /var/tmp/imap_0
135            /var/tmp/HTTP_23
136            /var/tmp/HTTP_48
137            /var/tmp/ldap_55
138            /var/tmp/ldap_487
139            /var/tmp/ldapmap1_0
140
141       krb5kdc_var_lib_t
142
143            /var/lib/kdcproxy(/.*)?
144
145       lastlog_t
146
147            /var/log/lastlog.*
148
149       mail_spool_t
150
151            /var/mail(/.*)?
152            /var/spool/imap(/.*)?
153            /var/spool/mail(/.*)?
154            /var/spool/smtpd(/.*)?
155
156       nfs_t
157
158
159       openshift_file_type
160
161
162       security_t
163
164            /selinux
165
166       selinux_login_config_t
167
168            /etc/selinux/([^/]*/)?logins(/.*)?
169
170       semanage_read_lock_t
171
172            /etc/selinux/([^/]*/)?modules/semanage.read.LOCK
173            /var/lib/selinux/[^/]+/semanage.read.LOCK
174
175       semanage_store_t
176
177            /etc/selinux/([^/]*/)?policy(/.*)?
178            /etc/selinux/(minimum|mls|targeted)/active(/.*)?
179            /etc/selinux/([^/]*/)?modules/(active|tmp|previous)(/.*)?
180            /var/lib/selinux(/.*)?
181            /etc/share/selinux/mls(/.*)?
182            /etc/share/selinux/targeted(/.*)?
183
184       semanage_tmp_t
185
186
187       semanage_trans_lock_t
188
189            /etc/selinux/([^/]*/)?modules/semanage.trans.LOCK
190            /var/lib/selinux/[^/]+/semanage.trans.LOCK
191
192       shadow_t
193
194            /etc/tcb/.+/shadow.*
195            /etc/shadow.*
196            /etc/gshadow.*
197            /etc/nshadow.*
198            /var/db/shadow.*
199            /etc/security/opasswd
200            /etc/security/opasswd.old
201
202       smsd_var_lib_t
203
204            /var/lib/smstools(/.*)?
205
206       stapserver_var_lib_t
207
208            /var/lib/stap-server(/.*)?
209
210       user_home_type
211
212            all user home files
213
214       useradd_var_run_t
215
216
217

FILE CONTEXTS

219       SELinux requires files to have an extended attribute to define the file
220       type.
221
222       You can see the context of a file using the -Z option to ls
223
224       Policy governs the access  confined  processes  have  to  these  files.
225       SELinux  useradd  policy is very flexible allowing users to setup their
226       useradd processes in as secure a method as possible.
227
228       STANDARD FILE CONTEXT
229
230       SELinux defines the file context types for the useradd, if  you  wanted
231       to store files with these types in a diffent paths, you need to execute
232       the semanage command to specify alternate labeling  and  then  use  re‐
233       storecon to put the labels on disk.
234
235       semanage   fcontext   -a   -t   useradd_var_run_t  '/srv/myuseradd_con‐
236       tent(/.*)?'
237       restorecon -R -v /srv/myuseradd_content
238
239       Note: SELinux often uses regular expressions  to  specify  labels  that
240       match multiple files.
241
242       The following file types are defined for useradd:
243
244
245
246       useradd_exec_t
247
248       -  Set files with the useradd_exec_t type, if you want to transition an
249       executable to the useradd_t domain.
250
251
252       Paths:
253            /usr/sbin/useradd,      /usr/sbin/userdel,      /usr/sbin/usermod,
254            /usr/sbin/newusers
255
256
257       useradd_var_run_t
258
259       -  Set  files with the useradd_var_run_t type, if you want to store the
260       useradd files under the /run or /var/run directory.
261
262
263
264       Note: File context can be temporarily modified with the chcon  command.
265       If  you want to permanently change the file context you need to use the
266       semanage fcontext command.  This will modify the SELinux labeling data‐
267       base.  You will need to use restorecon to apply the labels.
268
269

COMMANDS

271       semanage  fcontext  can also be used to manipulate default file context
272       mappings.
273
274       semanage permissive can also be used to manipulate  whether  or  not  a
275       process type is permissive.
276
277       semanage  module can also be used to enable/disable/install/remove pol‐
278       icy modules.
279
280       semanage boolean can also be used to manipulate the booleans
281
282
283       system-config-selinux is a GUI tool available to customize SELinux pol‐
284       icy settings.
285
286

AUTHOR

288       This manual page was auto-generated using sepolicy manpage .
289
290

SEE ALSO

292       selinux(8),  useradd(8),  semanage(8),  restorecon(8), chcon(1), sepol‐
293       icy(8), setsebool(8)
294
295
296
297useradd                            21-11-19                 useradd_selinux(8)
Impressum