1slapd_selinux(8) SELinux Policy slapd slapd_selinux(8)
2
3
4
6 slapd_selinux - Security Enhanced Linux Policy for the slapd processes
7
9 Security-Enhanced Linux secures the slapd processes via flexible manda‐
10 tory access control.
11
12 The slapd processes execute with the slapd_t SELinux type. You can
13 check if you have these processes running by executing the ps command
14 with the -Z qualifier.
15
16 For example:
17
18 ps -eZ | grep slapd_t
19
20
21
23 The slapd_t SELinux type can be entered via the slapd_exec_t file type.
24
25 The default entrypoint paths for the slapd_t domain are the following:
26
27 /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
28
30 SELinux defines process types (domains) for each process running on the
31 system
32
33 You can see the context of a process using the -Z option to ps
34
35 Policy governs the access confined processes have to files. SELinux
36 slapd policy is very flexible allowing users to setup their slapd pro‐
37 cesses in as secure a method as possible.
38
39 The following process types are defined for slapd:
40
41 slapd_t
42
43 Note: semanage permissive -a slapd_t can be used to make the process
44 type slapd_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
48
50 SELinux policy is customizable based on least access required. slapd
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run slapd with the tightest access possible.
53
54
55
56 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58
59 setsebool -P fips_mode 1
60
61
62
63 If you want to allow confined applications to run with kerberos, you
64 must turn on the kerberos_enabled boolean. Enabled by default.
65
66 setsebool -P kerberos_enabled 1
67
68
69
71 The SELinux process type slapd_t can manage files labeled with the fol‐
72 lowing file types. The paths listed are the default paths for these
73 file types. Note the processes UID still need to have DAC permissions.
74
75 auth_cache_t
76
77 /var/cache/coolkey(/.*)?
78
79 cluster_conf_t
80
81 /etc/cluster(/.*)?
82
83 cluster_var_lib_t
84
85 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93
94 cluster_var_run_t
95
96 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/pcsd-ruby.socket
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108
109 krb5_host_rcache_t
110
111 /var/tmp/krb5_0.rcache2
112 /var/cache/krb5rcache(/.*)?
113 /var/tmp/nfs_0
114 /var/tmp/DNS_25
115 /var/tmp/host_0
116 /var/tmp/imap_0
117 /var/tmp/HTTP_23
118 /var/tmp/HTTP_48
119 /var/tmp/ldap_55
120 /var/tmp/ldap_487
121 /var/tmp/ldapmap1_0
122
123 root_t
124
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
129 security_t
130
131 /selinux
132
133 slapd_cert_t
134
135 /etc/openldap/certs(/.*)?
136
137 slapd_db_t
138
139 /var/lib/ldap(/.*)?
140 /etc/openldap/slapd.d(/.*)?
141 /var/lib/openldap-data(/.*)?
142 /var/lib/openldap-ldbm(/.*)?
143 /var/lib/openldap-slurpd(/.*)?
144
145 slapd_lock_t
146
147 /var/lock/subsys/ldap
148 /var/lock/subsys/slapd
149
150 slapd_log_t
151
152 /var/log/ldap.*
153 /var/log/slapd.*
154
155 slapd_replog_t
156
157 /var/lib/ldap/replog(/.*)?
158
159 slapd_tmp_t
160
161
162 slapd_tmpfs_t
163
164
165 slapd_var_run_t
166
167 /var/run/openldap(/.*)?
168 /var/run/ldapi
169 /var/run/slapd.pid
170 /var/run/slapd.args
171
172
174 SELinux requires files to have an extended attribute to define the file
175 type.
176
177 You can see the context of a file using the -Z option to ls
178
179 Policy governs the access confined processes have to these files.
180 SELinux slapd policy is very flexible allowing users to setup their
181 slapd processes in as secure a method as possible.
182
183 EQUIVALENCE DIRECTORIES
184
185
186 slapd policy stores data with multiple different file context types un‐
187 der the /var/lib/ldap directory. If you would like to store the data
188 in a different directory you can use the semanage command to create an
189 equivalence mapping. If you wanted to store this data under the /srv
190 directory you would execute the following command:
191
192 semanage fcontext -a -e /var/lib/ldap /srv/ldap
193 restorecon -R -v /srv/ldap
194
195 STANDARD FILE CONTEXT
196
197 SELinux defines the file context types for the slapd, if you wanted to
198 store files with these types in a diffent paths, you need to execute
199 the semanage command to specify alternate labeling and then use re‐
200 storecon to put the labels on disk.
201
202 semanage fcontext -a -t slapd_var_run_t '/srv/myslapd_content(/.*)?'
203 restorecon -R -v /srv/myslapd_content
204
205 Note: SELinux often uses regular expressions to specify labels that
206 match multiple files.
207
208 The following file types are defined for slapd:
209
210
211
212 slapd_cert_t
213
214 - Set files with the slapd_cert_t type, if you want to treat the files
215 as slapd certificate data.
216
217
218
219 slapd_db_t
220
221 - Set files with the slapd_db_t type, if you want to treat the files as
222 slapd database content.
223
224
225 Paths:
226 /var/lib/ldap(/.*)?, /etc/openldap/slapd.d(/.*)?, /var/lib/openl‐
227 dap-data(/.*)?, /var/lib/openldap-ldbm(/.*)?, /var/lib/openldap-
228 slurpd(/.*)?
229
230
231 slapd_etc_t
232
233 - Set files with the slapd_etc_t type, if you want to store slapd files
234 in the /etc directories.
235
236
237
238 slapd_exec_t
239
240 - Set files with the slapd_exec_t type, if you want to transition an
241 executable to the slapd_t domain.
242
243
244 Paths:
245 /usr/lib/slapd, /usr/sbin/slapd, /usr/lib/openldap/slapd
246
247
248 slapd_initrc_exec_t
249
250 - Set files with the slapd_initrc_exec_t type, if you want to transi‐
251 tion an executable to the slapd_initrc_t domain.
252
253
254
255 slapd_keytab_t
256
257 - Set files with the slapd_keytab_t type, if you want to treat the
258 files as kerberos keytab files.
259
260
261
262 slapd_lock_t
263
264 - Set files with the slapd_lock_t type, if you want to treat the files
265 as slapd lock data, stored under the /var/lock directory
266
267
268 Paths:
269 /var/lock/subsys/ldap, /var/lock/subsys/slapd
270
271
272 slapd_log_t
273
274 - Set files with the slapd_log_t type, if you want to treat the data as
275 slapd log data, usually stored under the /var/log directory.
276
277
278 Paths:
279 /var/log/ldap.*, /var/log/slapd.*
280
281
282 slapd_replog_t
283
284 - Set files with the slapd_replog_t type, if you want to treat the
285 files as slapd replog data.
286
287
288
289 slapd_tmp_t
290
291 - Set files with the slapd_tmp_t type, if you want to store slapd tem‐
292 porary files in the /tmp directories.
293
294
295
296 slapd_tmpfs_t
297
298 - Set files with the slapd_tmpfs_t type, if you want to store slapd
299 files on a tmpfs file system.
300
301
302
303 slapd_unit_file_t
304
305 - Set files with the slapd_unit_file_t type, if you want to treat the
306 files as slapd unit content.
307
308
309
310 slapd_var_run_t
311
312 - Set files with the slapd_var_run_t type, if you want to store the
313 slapd files under the /run or /var/run directory.
314
315
316 Paths:
317 /var/run/openldap(/.*)?, /var/run/ldapi, /var/run/slapd.pid,
318 /var/run/slapd.args
319
320
321 Note: File context can be temporarily modified with the chcon command.
322 If you want to permanently change the file context you need to use the
323 semanage fcontext command. This will modify the SELinux labeling data‐
324 base. You will need to use restorecon to apply the labels.
325
326
328 semanage fcontext can also be used to manipulate default file context
329 mappings.
330
331 semanage permissive can also be used to manipulate whether or not a
332 process type is permissive.
333
334 semanage module can also be used to enable/disable/install/remove pol‐
335 icy modules.
336
337 semanage boolean can also be used to manipulate the booleans
338
339
340 system-config-selinux is a GUI tool available to customize SELinux pol‐
341 icy settings.
342
343
345 This manual page was auto-generated using sepolicy manpage .
346
347
349 selinux(8), slapd(8), semanage(8), restorecon(8), chcon(1), sepol‐
350 icy(8), setsebool(8)
351
352
353
354slapd 21-11-19 slapd_selinux(8)